NextSDS Logo
Safety Data Sheet EN

Lascaux Aquatint Spray Resist

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Lascaux Aquatint Spray Resist
Product Code
2095

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Product for Printmaking

Manufacturers & Suppliers

L

Lascaux Colours & Restauro, Barbara Diethelm AG

manufacturer

Zürichstrasse 42 CH-8306 Brüttisellen

+41 44 807 41 41

L

Lascaux Colours & Restauro Europe GmbH

distributor

Turmstrasse 11 D-78467 Konstanz

+49 7531 911 3996

Emergency Contacts

Tox Info Suisse

145

24-h

Tox Info Suisse

+41 44 251 51 51

24-h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Hazardous ingredients

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Take the casualty into the fresh air and keep warm. Keep at rest. Irregular breathing/no breathing: artificial respiration. Unconsciousness: lateral position - call a physician.

Skin contact

Wash away with soap and water and rinse. Do NOT use solvents or thinners.

Eye contact

Remove contact lenses, keep eyelids open. Flush with plenty of water (10 - 15 min.). Call a physician.

Ingestion

Contact a doctor immediately. Keep at rest. Do not induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol resistant foam, CO2, powders, water spray.

Unsuitable media

Waterjet.

Specific hazards

Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep away from ignition sources and provide for good ventilation. Refer to protective measures listed in sections 7 and 8.

Environmental

If the product contaminates lakes, rivers or sewages, inform appropriate authorities in accordance with local regulations.

Cleanup methods

Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth and place in container for disposal according to local regulations (see section 13). Clean preferably with a detergent; avoid use of solvents.

Materials: non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth; detergent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not eat or drink during work - no smoking. Comply with the health and safety at work laws. For personal protection see Section 8.

Storage

Always keep in containers of same material as the original one. See also instructions on the label. Avoid heating and direct sunlight. Keep containers dry and cool. Comply with the health and safety at work laws.

Hygiene

Do not eat or drink during work - no smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Eyes

Wear protective glasses in case of splashes.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
200 mPa.s
Ph
8,0 - 8,5
Lower Explosive Limit
---
Voc Content
---
Vapor Pressure
120 hPa
Vapor Density
---
Molecular Weight
---
Relative Evaporation Rate
---
Physical State Data
liquid
Density
1,1 g/cm³
Upper Explosive Limit
---
Solidification Point
---
Flammability
---
Colour
Blue.
Colour Intensity
---
Flash Point
not applicable
Form
---
Boiling Point
100 °C
Bulk Density
---
Crystallisation Point
---
Partition Coefficient
---
Odor Threshold
---
Solubility In Water
---
Odor
Poor, characteristic.
Physical State
Liquid.
Auto Ignition Temperature
---
Softening Point
---
Relative Density
---
Solubility In Fat
---
State Under Standard Conditions
---
Solubility
---
Evaporation Rate
---
Melting Point
---
Properties Status
---
Explosive Limits
---
Metal Corrosion
---
Decomposition Temperature
---
Kinematic Viscosity
---
Freezing Point
---
Cloud Point
---
Appearance
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Avoid

Stable under recommended storage and handling conditions (See section 7).

Decomposition

When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke, oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Lascaux Aquatint Spray Resist?

The signal word is no signal word.

What is the physical form of Lascaux Aquatint Spray Resist?

Lascaux Aquatint Spray Resist is a liquid. with blue. color. It has poor, characteristic. odor.

What is Lascaux Aquatint Spray Resist used for?

Product for Printmaking

Compliance Scanner

Scan your compliance