Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lascaux Plate-backing Resist
- Product Code
- 2091
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
ARE Product for Printmaking
Manufacturers & Suppliers
Lascaux Colours & Restauro, Barbara Diethelm AG
manufacturer
Zürichstrasse 42 CH-8306 Brüttisellen
+41 44 807 41 41
Lascaux Colours & Restauro Europe GmbH
distributor
Turmstrasse 11 D-78467 Konstanz
+49 7531 911 3996
Emergency Contacts
Tox Info Suisse
+41 44 251 51 51
24h/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Notes
Hazardous ingredients None
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the casualty into the fresh air and keep warm. Keep at rest. Irregular breathing/no breathing: artificial respiration. Unconsciousness: lateral position - call a physician.
Wash away with soap and water and rinse. Do NOT use solvents or thinners.
Remove contact lenses, keep eyelids open. Flush with plenty of water (10 - 15 min.). Call a physician.
Contact a doctor immediately. Keep at rest. Do not induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam, CO2, powders, water spray.
Waterjet.
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.
Firefighter Protection
Appropriate breathing apparatus may be required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep away from ignition sources and provide for good ventilation. Refer to protective measures listed in sections 7 and 8.
If the product contaminates lakes, rivers or sewages, inform appropriate authorities in accordance with local regulations.
Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth and place in container for disposal according to local regulations (see section 13). Clean preferably with a detergent; avoid use of solvents.
Materials: non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat or drink during work - no smoking. Comply with the health and safety at work laws. For personal protection see Section 8.
Always keep in containers of same material as the original one. Avoid heating and direct sunlight. Keep containers dry and cool. Comply with the health and safety at work laws.
Do not eat or drink during work - no smoking. Comply with the health and safety at work laws.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective glasses in case of splashes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (See section 7).
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke, oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lascaux Plate-backing Resist?
The signal word is no signal word.
What is the physical form of Lascaux Plate-backing Resist?
Lascaux Plate-backing Resist is a liquid with rose/pink color. It has poor, characteristic odor.
What is Lascaux Plate-backing Resist used for?
ARE Product for Printmaking