Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SBZ GPIII 4cSt
Regulatory Identifiers
- CAS Number
- 72623-86-0 Check regulations →
- EC Number
- 276-737-9 Check regulations →
- REACH No.
- Not known.
Identified Uses
Additive for lubricants.
Uses advised against
Not known.
Manufacturers & Suppliers
SBZ CORPORATION
Kendal Court, Hurricane Way, Wickford Essex SS11 8YB
+44 (0) 1268 761 504
Emergency Contacts
SBZ Corporation
+1 202 464 2554
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based EC: 276-737-9 | 72623-86-0 | 99% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Wash with plenty of water.
Flush eyes with water for at least 15 minutes while holding eyelids open.
Do NOT induce vomiting. Immediately call a POISON CENTRE/doctor.
Immediate Medical Attention
Unlikely to be required but if necessary treat symptomatically.
Medical Treatment
treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with carbon dioxide, dry chemical, foam or waterspray.
Do not use water jet.
Decomposes in a fire giving off toxic fumes: Carbon monoxide, Carbon dioxide
Firefighter Protection
Fire fighters should wear complete protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drains, sewers or watercourses.
Adsorb spillages onto sand, earth or any suitable adsorbent material. Transfer to a container for disposal.
Materials: sand, earth or any suitable adsorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation when using the material and follow the principles of good occupational hygiene to control personal exposures.
Store locked up. Storage temperature Ambient. Storage life Stable under normal conditions.
follow the principles of good occupational hygiene to control personal exposures.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Use with ventilation, local exhaust ventilation or breathing protection.
Handling of larger amounts : Wear impervious gloves (EN374). Recommended: Neoprene, Nitrile rubber, Viton Breakthrough time : >8hour(s)
Wear protective eye glasses for protection against liquid splashes.
Wear suitable respiratory protection.
Not normally required.
Do not allow to enter drains, sewers or watercourses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
No hazardous reactions known if used for its intended purpose.
Heat and direct sunlight.
Oxidizing agents.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SBZ GPIII 4cSt?
The signal word is danger.
What is the physical form of SBZ GPIII 4cSt?
SBZ GPIII 4cSt is a liquid. appearing as liquid. with clear and bright color. It has mild petroleum. odor.
What is the solubility of SBZ GPIII 4cSt?
Insoluble in water.
What is SBZ GPIII 4cSt used for?
Additive for lubricants.
What are the hazard statements for SBZ GPIII 4cSt?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of SBZ GPIII 4cSt?
The melting point is Not known. and the boiling point is 355°C.