Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RHODIMET AT 88
- Product Code
- ADI004
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Animal feed.
Manufacturers & Suppliers
Adisseo France S.A.S.
manufacturer
42, avenue Aristide Briand.92160.Antony.France.
+33 (0)1 46 74 70 00
http://www.adisseo.com
Emergency Contacts
INRS / ORFILA
+33 (0)1 45 42 59 59
CareChem
+44 (0) 208 762 8322
24h/24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-HYDROXY-4-(METHYLTHIO)BUTYRIC ACID EC: 209-523-0 | 583-91-5 | 50 - 100% | Yes |
Notes
Full text of risk phrases appearing in section 3: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In the event of inhalation, move patient to the open air. Keep warm and at rest.
Wash skin immediately and thoroughly with soap and water.
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
Symptoms: redness, pain or visual impairment
Do not force vomiting.
Immediate Medical Attention
in case of doubt or if symptoms persist, always call a doctor. If there is any redness, pain or visual impairment, consult an ophthalmologist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Sprayed water, carbon dioxide (CO2) and foam.
Do not use large water jets.
Keep packages near the fire cool, to prevent pressurised containers from bursting.
Firefighter Protection
fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways. Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13). If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory procedures
Pump the product into a suitably-labelled non-metal, sealed, plastic, salvage receptacle. Neutralise surplus carefully; use lime or sodium carbonate. Wash the ground thoroughly with running water. Wash non-retrievable surplus thoroughly with running water.
Materials: lime or sodium carbonate
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When deliveries are made in drums or IBC, only use fork-lift trucks or pallet trucks for unloading vans and containers as well as for moving products. For personal safety, see §8. Observe precautions stated on label and also industrial safety regulations. Product must not come into contact with the eyes
Store in a cool, dry and well-ventilated area. Stack at ambient temperature in the original receptacle. Store the receptacle tightly closed.
Smoking, eating and drinking are prohibited in premises where the preparation is used
Prevent access by unauthorised personnel.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear gloves sealed to acids.
Avoid contact with eyes. Wear safety goggles.
If ventilation is insufficient to maintain fume concentrations below maximum exposure values, wear respiratory devices.
For further information, see § 11 of S.D.S. - Toxicological information.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The preparation is stable at the handling and storage conditions recommended per § 7 of the safety data sheet
strong oxidants
Thermal decomposition can release carbon and sulphur.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RHODIMET AT 88?
The signal word is na: r-phrases.
What is the physical form of RHODIMET AT 88?
RHODIMET AT 88 is a viscous liquid with brown. color. It has characteristic. odor.
What is the solubility of RHODIMET AT 88?
Insoluble or partially soluble in standard solvents.
What is RHODIMET AT 88 used for?
Animal feed.