Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Synthetic 2T base oil
- Product Form
- Substance (UVCB)
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- all the ingredients of this product in the scope of Regulation 1907/2006/EC (REACH), if not exempted, have been registered.
Identified Uses
Industrial use
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2, 9940 Ertvelde - Belgium
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS
+32 3 575 55 55
SGS ERS
+1 888 765 6554
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Generic name : Synthetic 2T base oil
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Synthetic 2T base oil | --- | 100% | No |
| Fatty esters | --- | 90% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air. Respiratory problems: consult a doctor/medical service.
Soap may be used. Rinse immediately with plenty of water for 15 minutes. Consult a doctor/medical service.
Rinse with water. Consult an ophtalmologist if irritation persists.
Rinse mouth thoroughly with water. Call a poison center or a doctor if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC powder. Carbon dioxide. Dry sand. Dry chemical powder. Adapt extinguishing media to the environment.
Solid water jet ineffective as extinguishing medium.
DIRECT FIRE HAZARD: Combustible. INDIRECT FIRE HAZARD: Heating increases the fire hazard. Temperature above flashpoint: higher fire/explosion hazard.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Exposure to heat: have neighbourhood close doors and windows. Exposure to fire/heat: consider evacuation. Wash contaminated clothes.
Prevent soil and water pollution.
Clean contaminated surfaces with an excess of water and soap solution. Take up liquid spill into inert absorbent material, e.g.: dry sand/earth/vermiculite or powdered limestone.
Materials: water and soap solution, dry sand/earth/vermiculite or powdered limestone
Related Products
Similar products with comparable safety profiles
General Purpose Viscosity Standard – Synthetic Base Oil
---
Pure Performance® Base Oil 110N
---
Base Oil / Lubricating oil (petroleum) hydrotreated neutral oil-based - AD BASE 4CST
CAS: 72623-87-1
aramcoULTRA 2 (Base Oil 60 Neutral)
CAS: 64742-55-8
Base Oil Ultra - S2 (60 Neutral)
---
Base Oil / Lubricating oil (petroleum) hydrotreated neutral oil-based
CAS: 72623-87-1
Base Oil / Lubricating oil (petroleum) hydrotreated neutral oil-based
CAS: 72623-87-1
Base Oil / Lubricating oil (petroleum) hydrotreated neutral oil-based
CAS: 72623-87-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling temperature : ≥ 10 °C above melting point
Keep container in a well-ventilated place. Store at ambient temperature. Keep out of direct sunlight. Meet the legal requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves. GIVE GOOD RESISTANCE: nitrile rubber
Face shield
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of (carbon monoxide - carbon dioxide).
No additional information available
No supplementary information available.
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Prevent dispersion by covering with dry absorbent, Scoop solid spill into closing containers, Scoop absorbed substance into closing containers, Clean contaminated surfaces with an excess of water and soap solution, Wash clothing and equipment after handling
Remove to an authorized waste treatment plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Please contact Oleon for further information (sds@oleon.com)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Synthetic 2T base oil?
The signal word is no signal word.
What is the physical form of Synthetic 2T base oil?
Synthetic 2T base oil is a liquid appearing as liquid. with yellow to amber. color. It has sweet. characteristic. odor.
What is the solubility of Synthetic 2T base oil?
Water: < 0,001 g/l (20°C)
What is Synthetic 2T base oil used for?
Industrial use
What is the melting point of Synthetic 2T base oil?
The melting point is < -30 °C and the boiling point is > 250 °C.