Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CO-1214 EU
- Product Code
- 95883640_PGC_NG
- Synonyms
- 10262101
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Intermediate. Laboratory chemicals. Lubricant. Lubricant additives. Processing aid. Solvent. Metal working fluids / rolling oils.
Uses advised against
Not available.
Manufacturers & Suppliers
The Procter & Gamble Company
Sharon Woods Innovation Center 11530 Reed Hartman Highway Cincinnati, OH 45241 United States
1-800-477-8899
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If breathing is irregular or stopped, administer artificial respiration. Consult a physician.
Symptoms: No information available.
Wash skin with soap and water.
Symptoms: No information available.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Symptoms: No information available.
Consult a physician. Do not induce vomiting without medical advice.
Symptoms: No information available.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide (CO₂). Alcohol resistant foam. Water spray or fog.
Do NOT use water jet.
May emit toxic fumes under fire conditions.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit. Do not allow run-off from fire-fighting to enter drains or water courses.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid subsoil penetration. Do not allow to enter into surface water or drains.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective clothing (see section 8). Handle in accordance with good industrial hygiene and safety practice.
None under normal use conditions.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with local exhaust ventilation. Mechanical - may be necessary if working at elevated temperatures or in enclosed areas.
Permanent contact: Nitrile rubber/nitrile latex; Break through time: >= 480 min; Material thickness: 0.35 mm Material: butyl-rubber; Break through time: >= 480 min; Material thickness: 0.5 mm Splash protection: Natural rubber/natural latex; Break through time: >= 60 min; Material thickness: 0.5 mm. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion.
Tight sealing safety goggles.
None under normal use conditions. In case of inadequate ventilation wear respiratory protection. Combination filtering device (DIN EN 141).
Wear protective gloves and protective clothing.
Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Strong oxidizing agents.
Hazardous polymerization does not occur.
Extremes of temperature and direct sunlight. Ionizing radiation. Avoid contamination with other substances.
Strong oxidizing agents.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is CO-1214 EU known by?
CO-1214 EU is also known as: 10262101
What is the hazard signal word for CO-1214 EU?
The signal word is warning.
What is the physical form of CO-1214 EU?
CO-1214 EU is a liquid with colorless color. It has no information available odor.
What is the solubility of CO-1214 EU?
0.003 g/l @ 20 °C
What is CO-1214 EU used for?
Intermediate. Laboratory chemicals. Lubricant. Lubricant additives. Processing aid. Solvent. Metal working fluids / rolling oils.
What are the hazard statements for CO-1214 EU?
This substance has 3 hazard statements:
- H319: Causes serious eye irritation
- H400: Very toxic to aquatic life
- H411: Toxic to aquatic life with long lasting effects
What is the melting point of CO-1214 EU?
The melting point is 16 °C / 66.2 °F and the boiling point is Not available.