Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Metam-sodium (ISO)
- Product Code
- A0044728
- Synonyms
- sodium methyldithiocarbamate
Regulatory Identifiers
- CAS Number
- 137-42-8 Check regulations →
Identified Uses
General use
Uses advised against
Do not use for squirting or spraying. Do not use for products which come into direct contact with the skin.
Manufacturers & Suppliers
Chemos GmbH & Co. KG
Sonnenring 7 84032 Altdorf Germany
+49 871-966346-0
http://www.chemos.de/
Emergency Contacts
Emergency information service
+49 89 1 92 40
National Poison Information Centre Medical Toxicology Unit
+44 171 635 91 91
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| metam-sodium (ISO) EC: 205-293-0 | 137-42-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, BC-powder, Carbon dioxide (CO2)
Water jet
Nitrogen oxides (NOx), Carbon monoxide (CO), Carbon dioxide (CO2), Sulphur oxides (SOx)
In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Remove persons to safety. For emergency responders: Wear breathing apparatus if exposed to vapours/dust/spray/gases.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it. If substance has entered a water course or sewer, inform the responsible authority.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage.
Materials: absorbent material (e.g. cloth, fleece), sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
Sodium metabisulfite
CAS: 7681-57-4
MetAMINO®
CAS: 59-51-8
Sodium carbonate anhydrous for analysis EMSURE® ISO
CAS: 497-19-8
Sodium methoxide
CAS: 124-41-4
Sodium metasilicate, anhydrous
CAS: 6834-92-0
Sodium
CAS: 7440-23-5
Metset 2032-S
---
Sodium Metabisulfite food grade (E223)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Measures to prevent fire as well as aerosol and dust generation. Use local and general ventilation. Use only in well-ventilated areas.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Measures to prevent fire as well as aerosol and dust generation. Use local and general ventilation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Appropriate engineering controls. General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below "Conditions to avoid".
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidisers Acids
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3267
- Shipping Name
- CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
- Transport Class
- 8 (corrosive substances)
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Metam-sodium (ISO) known by?
Metam-sodium (ISO) is also known as: sodium methyldithiocarbamate
What is the hazard signal word for Metam-sodium (ISO)?
The signal word is danger.
What is the physical form of Metam-sodium (ISO)?
Metam-sodium (ISO) is a liquid with brown color. It has characteristic odor.
What is the solubility of Metam-sodium (ISO)?
not determined
What is Metam-sodium (ISO) used for?
General use
What are the hazard statements for Metam-sodium (ISO)?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Metam-sodium (ISO)?
The melting point is not determined and the boiling point is not determined.