Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- C-810L K EU
- Product Form
- substance
- Product Code
- 99889654_PGC_CLPR7
- Synonyms
- 10223561
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119555294-36-0000, 01-2119555294-36-0014
- UFI Code
- Not applicable
Identified Uses
Intermediate Laboratory chemicals
Uses advised against
No information available
Manufacturers & Suppliers
Procter & Gamble Nederland B.V.
manufacturer
Watermanweg 100, 3067 GG, Rotterdam, Nederlands
+322-456-4150
Procter & Gamble International Operations SA
47, Route de Saint-Georges, 1213 Petit-Lancy1, Switzerland
+(44) 778 710 6007
Emergency Contacts
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C8-10 (P&GC) EC: 273-086-2 | 68937-75-7 | 100% | Yes |
Full text of H- and EUH-phrases: see section 16 Acute Toxicity Estimate No information available
Notes
This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59).
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing has stopped, give artificial respiration. Get medical attention immediately. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen.
Symptoms: Delayed pulmonary edema may occur.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical attention.
Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated. Do not give chemical antidotes. Asphyxia from glottal edema may occur. Marked decrease in blood pressure may occur with moist rales, frothy sputum, and high pulse pressure.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam. Carbon dioxide (CO2). Dry chemical. Water spray or fog.
CAUTION: Use of water spray when fighting fire may be inefficient. Do not scatter spilled material with high pressure water streams.
The product causes burns of eyes, skin and mucous membranes.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if you can do it without risk. Do not touch or walk through spilled material. A vapor suppressing foam may be used to reduce vapors. Dike far ahead of spill to collect runoff water. Keep out of drains, sewers, ditches and waterways. Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.
Prevent further leakage or spillage if safe to do so. Should not be released into the environment. Do not allow to enter into soil/subsoil. Prevent product from entering drains.
Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labeled containers. Clean contaminated objects and areas thoroughly observing environmental regulations.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Handle product only in closed system or provide appropriate exhaust ventilation. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash before reuse.
Store locked up.
Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Impervious gloves.
Tight sealing safety goggles. Face protection shield.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required. In the case of dust or aerosol formation use respirator with an approved filter.
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron.
Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Strong oxidizing agents.
None under normal processing.
Exposure to air or moisture over prolonged periods. Temperatures above 135 °C / 275 °F.
Acids. Bases. Oxidizing agent.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste in accordance with environmental legislation.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3265
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.(Fatty acids, C8-10)
- Transport Class
- 8
- Packing Group
- III
223, 274
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is C-810L K EU known by?
C-810L K EU is also known as: 10223561
What is the hazard signal word for C-810L K EU?
The signal word is danger.
What is the physical form of C-810L K EU?
C-810L K EU is a liquid @ 25°c with water white to yellow color. It has musty rancid odor.
What is the solubility of C-810L K EU?
Not applicable
What is C-810L K EU used for?
Intermediate Laboratory chemicals
What are the hazard statements for C-810L K EU?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage
- H412: Harmful to aquatic life with long lasting effects
What is the melting point of C-810L K EU?
The melting point is 3 °C and the boiling point is 232 - 299.5 °C.