Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lupranol* 2074
- Chemical Name
- Polyetherpolyol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
polyurethane component, industrial chemicals
Manufacturers & Suppliers
BASF SE
global supplier
67056 Ludwigshafen GERMANY
+49 621 60-0
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
polyetherpolyol, branched Polymer
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene EC: 270-128-1 | 68411-46-1 | 0.1 - 3% | Yes |
Notes
For the classifications not written out in full in this section, including the hazard classes and the hazard statements, the full text is listed in section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air.
Wash thoroughly with soap and water
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink 200-300 ml of water.
Immediate Medical Attention
Symptomatic treatment (decontamination, vital functions).
Medical Treatment
Symptomatic treatment (decontamination, vital functions).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, dry powder, foam, carbon dioxide
The substances/groups of substances mentioned can be released in case of fire.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective clothing. Information regarding personal protective measures, see section 8.
For residues: Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).
For large amounts: Pump off product.
Do not empty into drains. Do not discharge into the subsoil/soil.
For large amounts: Pump off product. For residues: Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).
Materials: suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure thorough ventilation of stores and work areas.
Containers should be stored tightly sealed in a dry place.
No special precautions necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear respiratory protection if ventilation is inadequate.
Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Wear respiratory protection if ventilation is inadequate. (Particle filter EN 143 P2 or FFP2)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
For information regarding environmental exposure controls, see Section 6.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable. Peroxides: The product does not contain peroxides. The product/the substance has not a tendency towards the formation of peroxide.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal. Reactions with water/air: Reaction with: water Flammable gases: no Toxic gases: no
No hazardous reactions if stored and handled as prescribed/indicated. The product is chemically stable.
Temperature: < 0 °C
acids, oxidizing agents, isocyanates
No hazardous decomposition products if stored and handled as prescribed/indicated.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lupranol* 2074?
The signal word is no signal word.
What is the physical form of Lupranol* 2074?
Lupranol* 2074 is a liquid with colourless to brown color. It has almost odourless odor.
What is Lupranol* 2074 used for?
polyurethane component, industrial chemicals