NextSDS Logo
Safety Data Sheet EN

GLYSANTIN® G48® blue-green also suitable for electric vehicles

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GLYSANTIN® G48® blue-green also suitable for electric vehicles

Regulatory Identifiers

CAS Number
N/A

Identified Uses

engine coolant

Uses advised against

None known

Manufacturers & Suppliers

B

BASF Canada Inc.

manufacturer

5025 Creekbank Road, Building A, Floor 2, Mississauga, ON, L4W 0B6, CANADA

Emergency Contacts

CHEMTREC

1-800-424-9300

BASF HOTLINE

(800) 454-COPE (2673)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Repr. Cat. 1B
Repr. Cat. 1B
STOT RE Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H360 May damage fertility. May damage the unborn child.
H373 May cause damage to organs (Kidney) through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe dust/gas/mist/vapours.
P264 Wash contaminated body parts thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves, protective clothing and eye protection or face protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P308 + P311 IF exposed or concerned: Call a POISON CENTER or physician.
P314 Get medical advice/attention if you feel unwell.
P330 Rinse mouth
P405 Store locked up.
P501 Dispose of contents/container in accordance with local regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
ethylene glycol 107-21-1 75 - 100% No
Hexanoic acid, 2-ethyl-, sodium salt 19766-89-3 1 - 5% No
Decanedioic acid, disodium salt 17265-14-4 1 - 3% No
Boron sodium oxide (B4Na2O7) 1330-43-4 0.3 - 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Keep patient calm, remove to fresh air, seek medical attention.

Symptoms: coughing, respiratory disorders, dyspnea

Skin contact

Immediately wash thoroughly with soap and water, seek medical attention.

Symptoms: skin irritation

Eye contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open. If irritation develops, seek medical attention.

Symptoms: corneal injury, severe pain

Ingestion

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention. Administer 50 ml of pure ethanol in a drinkable concentration.

Symptoms: nausea, vomiting, diarrhea, abdominal cramps

Immediate Medical Attention

Seek medical attention.

Medical Treatment

Treat according to symptoms (decontamination, vital functions), no known specific antidote.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water spray, dry powder, foam

Specific hazards

Hazards during fire-fighting: harmful vapours. Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Firefighter Protection

Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Small spill

For small amounts: Pick up with absorbent material (e.g. sand, sawdust, general-purpose binder).

Large spill

For large amounts: Pump off product.

Environmental

Do not discharge into surface waters/groundwater.

Cleanup methods

Pick up with absorbent material, Pump off product

Materials: absorbent material (e.g. sand, sawdust, general-purpose binder)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure thorough ventilation of stores and work areas. Shut containers immediately after taking product because product takes up the humidity of air.

Storage

Containers should be stored tightly sealed in a dry place.

Fire prevention

Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear chemically impervious protective gloves.

Eyes

Safety glasses with side-shields.

Respiratory

Respiratory protection in case of vapour/aerosol release. Combination filter for gases/vapours of organic compounds and solid and liquid particles (f.e. EN 14387 Type A-P2)

Skin/Body

Body protection must be chosen based on level of activity and exposure., Protective coverall and/or impermeable apron and boots as necessary.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
No applicable information available.
Odor
of glycol
Flash Point
127 °C
Crystallisation Point
---
Softening Point
---
Freezing Point
No applicable information available.
Physical State
liquid
Kinematic Viscosity
20 - 30 mm2/s (20 °C)
Vapor Density
No applicable information available.
Evaporation Rate
not determined
Colour
blue-green
Solidification Point
---
Boiling Point
165 °C
Solubility In Water
soluble, The product has not been tested. The statement has been derived from the properties of the individual components.
Lower Explosive Limit
For liquids not relevant for classification and labelling. The lower explosion point may be 5 - 15 °C below the flash point.
Metal Corrosion
---
Partition Coefficient
Study scientifically not justified.
Molecular Weight
No applicable information available.
Appearance
---
Form
liquid
Decomposition Temperature
No decomposition if correctly stored and handled.
Dynamic Viscosity
No applicable information available.
Auto Ignition Temperature
> 440 °C
Density
1.122 g/cm3 (20 °C)
Solubility
soluble solvent(s): polar solvents,
Explosive Limits
---
Vapor Pressure
0.2 hPa (20 °C)
Physical State Data
liquid
Voc Content
---
Upper Explosive Limit
For liquids not relevant for classification and labelling.
Odor Threshold
not determined
Relative Density
No applicable information available.
Bulk Density
---
Properties Status
---
Solubility In Fat
---
State Under Standard Conditions
---
Relative Evaporation Rate
---
Ph
7.1 - 7.3
Cloud Point
---
Flammability
hardly combustible
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable if stored and handled as prescribed/indicated.

Reactivity

No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal. Oxidizing properties: not fire-propagating

Hazardous reactions

No hazardous reactions when stored and handled according to instructions.

Avoid

No conditions to avoid anticipated.

Incompatible

strong oxidizing agents

Decomposition

Hazardous decomposition products: No hazardous decomposition products if stored and handled as prescribed/indicated. Thermal decomposition: No decomposition if correctly stored and handled.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local authority regulations.

Disposal

Do not discharge into drains/surface waters/groundwater.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

NFPA Hazard codes: Health: 1, Fire: 1, Reactivity: 0, Special: null

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GLYSANTIN® G48® blue-green also suitable for electric vehicles?

The signal word is danger.

What is the physical form of GLYSANTIN® G48® blue-green also suitable for electric vehicles?

GLYSANTIN® G48® blue-green also suitable for electric vehicles is a liquid with blue-green color. It has of glycol odor.

What is the solubility of GLYSANTIN® G48® blue-green also suitable for electric vehicles?

soluble solvent(s): polar solvents,

What is GLYSANTIN® G48® blue-green also suitable for electric vehicles used for?

engine coolant

What are the hazard statements for GLYSANTIN® G48® blue-green also suitable for electric vehicles?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H360: May damage fertility. May damage the unborn child.
  • H373: May cause damage to organs (Kidney) through prolonged or repeated exposure.

What is the melting point of GLYSANTIN® G48® blue-green also suitable for electric vehicles?

The melting point is No applicable information available. and the boiling point is 165 °C.