Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CE-1098 (EU)
- Product Code
- 96183183, 99704056
- Synonyms
- Decanoic acid, methyl ester
Regulatory Identifiers
- CAS Number
- 110-42-9 Check regulations →
- REACH No.
- 01-2119487998-07-0003 01-2119487998-07-0000
Identified Uses
Intermediate. Solvents. (fuels, cleaning agents, coatings, distribution, formulation, laboratories, lubricants, metal working fluids)
Uses advised against
None known.
Manufacturers & Suppliers
Procter & Gamble Nederland B.V.
national supplier
Watermanweg 100 3067 GG Rotterdam Netherlands
+322-456-4150
Procter & Gamble International Operations SA
global supplier
P&G Chemicals - Europe 47, Route de Saint-Georges 1213 Petit-Lancy1, Switzerland
+(44) 778 710 6007
Emergency Contacts
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| METHYL DECANOATE | 110-42-9 | 98.5 - 100% | Yes |
Notes
CLP: Regulation No. 1272/2008. DSD: Directive 67/548/EEC. PBT: persistent, bioaccumulative and toxic substance. vPvB: very persistent and very bioaccumulative substance. #: This substance has been assigned Community workplace exposure limit(s). M: M-factor
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing stops, provide artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
Wash the skin immediately with soap and water. Remove contaminated clothing. Get medical attention if irritation develops and persists. Wash clothing separately before reuse.
Flush thoroughly with water for at least 15 minutes. Get medical assistance.
Never give anything by mouth to a victim who is unconscious or is having convulsions. Do not induce vomiting. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Carbon dioxide (CO2). Dry chemicals.
Water spray may be ineffective on fire.
Combustion causes toxic fumes. Carbon monoxide and carbon dioxide.
Cool containers with flooding quantities of water until well after fire is out.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dike flow of spilled material using soil or sandbags to minimize contamination of drains, surface and ground waters.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.
Materials: earth, sand or other non-combustible material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Since emptied containers may retain product residue, follow label warnings even after container is emptied. Wash thoroughly after handling. Handle in accordance with good industrial hygiene and safety practices. Avoid contact with eyes, skin, and clothing. Keep away from sources of ignition.
Store in a cool, dry place with adequate ventilation.
Wash thoroughly after handling. Handle in accordance with good industrial hygiene and safety practices. Avoid contact with eyes, skin, and clothing.
Keep away from sources of ignition, open flames and high temperatures.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust is recommended. Mechanical ventilation may be required.
Nitrile gloves are recommended.
Use safety goggles and face shield in case of splash risk.
No protection is ordinarily required under normal conditions of use and with adequate ventilation. When dusts or thermal processing fumes are generated and ventilation is not sufficient to effectively remove them, appropriate NIOSH/MSHA approved respiratory protection must be provided.
Wear suitable protective clothing. If prolonged or repeated contact is likely, chemical resistant clothing is recommended.
See Sections 6.2, 6.3 and 13.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Oxidizing agents. Strong bases.
Hazardous polymerisation does not occur.
Reacts with strong base to produce methanol.
Oxidizing agents. Strong bases.
Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, Liquid, N.O.S. (Contains Methyl Decanoate) (Decanoic acid, methyl ester)
- Transport Class
- 9
- Packing Group
- III
Not available.
Not available.
Not available.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is CE-1098 (EU) known by?
CE-1098 (EU) is also known as: Decanoic acid, methyl ester
What is the hazard signal word for CE-1098 (EU)?
The signal word is no signal word.
What is the physical form of CE-1098 (EU)?
CE-1098 (EU) is a liquid. with colourless. color. It has fruity. odor.
What is the solubility of CE-1098 (EU)?
10,62 mg/l at 25°C
What is CE-1098 (EU) used for?
Intermediate. Solvents. (fuels, cleaning agents, coatings, distribution, formulation, laboratories, lubricants, metal working fluids)
What are the hazard statements for CE-1098 (EU)?
This substance has 1 hazard statement:
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of CE-1098 (EU)?
The melting point is -18 °C (-0,4 °F) and the boiling point is 224 °C (435,2 °F).