NextSDS Logo
Safety Data Sheet EN

Agri-Pure AP-406

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Agri-Pure AP-406

Regulatory Identifiers

CAS Number
N/A
REACH No.
01-2119485821-32-xxxx

Identified Uses

Industrial use.

Uses advised against

Not determined or not applicable.

Manufacturers & Suppliers

C

Cargill N.V.

Bedrijvenlaan 9 2800 Mechelen, Belgium

+32 (0) 15 400 411

Emergency Contacts

VelocityEHS (formerly ChemTel, Inc)

+1-813-248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Fatty acids, vegetable-oil, Me esters EC: 273-606-8 68990-52-3 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. Get medical advice if you feel unwell.

Skin contact

Wash with plenty of water / soap and rinse thoroughly. Get medical advice if skin irritation occurs or if you feel unwell.

Symptoms: skin irritation occurs

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention.

Ingestion

Rinse mouth and do not induce vomiting. Get medical advice if you feel unwell or concerned.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use Water (fog only), dry chemical, chemical foam, carbon dioxide, or alcohol-resistant foam.

Unsuitable media

Do not use water stream as an extinguisher, as this may spread fire.

Specific hazards

Thermal decomposition can lead to release of irritating gases and vapors.

Instructions

Water may be used to cool and protect containers. Fight fire from a safe distance, and keep upwind.

Firefighter Protection

Use typical firefighting equipment, self-contained breathing apparatus, special tightly sealed suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear recommended personal protective equipment. Ensure adequate ventilation. Ensure air handling systems are operational.

Environmental

Should not be released into the environment. Prevent entry into sewers, water courses, basements or confined areas.

Cleanup methods

Used rags or other cleaning materials should be soaked with water and placed in a sealed container to prevent spontaneous combustion. Absorb with non-combustible liquid-binding material (sand, diatomaceous earth (clay), acid binders, universal binders).

Materials: Used rags or other cleaning materials, non-combustible liquid-binding material (sand, diatomaceous earth (clay), acid binders, universal binders)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use appropriate personal protective equipment (see Section 8). Used rags or other cleaning materials should be soaked with water and placed in a sealed container to prevent spontaneous combustion. Wash thoroughly after handling. Use only with adequate ventilation. Avoid breathing mist or vapor. Do not eat, drink, smoke or use personal products when handling chemical substances.

Storage

Store in a cool, well-ventilated area. Protect from freezing and physical damage. Keep container tightly sealed. Store away from ignition sources. Store away from incompatible materials (See Section 10). Avoid contact with air/oxygen. Avoid heat and direct sunlight.

Hygiene

Wash thoroughly after handling. Do not eat, drink, smoke or use personal products when handling chemical substances.

Fire prevention

Used rags or other cleaning materials should be soaked with water and placed in a sealed container to prevent spontaneous combustion. Store away from ignition sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Emergency eye wash fountains and safety showers should be available in the immediate vicinity of use or handling. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapor and mists below the applicable workplace exposure limits (Occupational Exposure Limits-OELs) indicated above.

Hands

Select glove material impermeable and resistant to the substance. Suitable glove barrier materials include: Polyvinyl chloride (PVC)

Eyes

Safety goggles or glasses, or appropriate eye protection.

Respiratory

Normally not needed if well-ventilated. Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, use a NIOSH-approved respirator.

Skin/Body

Wear protective clothing as necessary to minimize prolonged skin contact. Selection of specific items will depend on task.

Environmental

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
6.2 logPow (22°C, OECD Guideline 117)
Lower Explosive Limit
Not determined or not available.
Physical State
Liquid.
Cloud Point
---
Flash Point
170°C
Freezing Point
Not determined or not available.
Solubility In Fat
---
Form
---
Colour Intensity
---
Solubility
<0.000023 g/L at 20°C
Auto Ignition Temperature
Not determined or not available.
Boiling Point
302.5 - 379.4°C
Properties Status
---
Colour
Yellow.
Physical State Data
liquid
Crystallisation Point
---
Solidification Point
---
Vapor Pressure
4.2 hPa at 25°C
Relative Evaporation Rate
---
Odor
Characteristic
Voc Content
---
Melting Point
Not determined or not available.
Metal Corrosion
No data available/Not applicable
Upper Explosive Limit
Not determined or not available.
Explosive Limits
---
Evaporation Rate
---
Vapor Density
---
Solubility In Water
<0.000023 g/L at 20°C
Bulk Density
---
Molecular Weight
---
Ph
Not determined or not available.
State Under Standard Conditions
---
Flammability
Product is not flammable.
Appearance
---
Relative Density
Not determined or not available.
Density
0.882 g/cm³
Dynamic Viscosity
---
Decomposition Temperature
Not determined or not available.
Softening Point
---
Odor Threshold
Characteristic
Kinematic Viscosity
4.429 mm²/s
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of use and storage.

Reactivity

Does not react under normal conditions of use and storage.

Hazardous reactions

None under normal conditions of use and storage. High surface area exposure to oxygen can result in polymerization and release of heat.

Avoid

Keep away from heat and direct sunlight. Contact with incompatible materials. Exposure to heat and contact with sources of ignition. High surface area exposure to oxygen can result in polymerization and release of heat.

Incompatible

Strong oxidizing agents.

Decomposition

Carbon monoxide, carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Agri-Pure AP-406?

The signal word is no signal word.

What is the physical form of Agri-Pure AP-406?

Agri-Pure AP-406 is a liquid. with yellow. color. It has characteristic odor.

What is the solubility of Agri-Pure AP-406?

<0.000023 g/L at 20°C

What is Agri-Pure AP-406 used for?

Industrial use.

What is the melting point of Agri-Pure AP-406?

The melting point is Not determined or not available. and the boiling point is 302.5 - 379.4°C.

Compliance Scanner

Scan your compliance