Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLOSPERSE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Processing aid for industrial applications.
Uses advised against
All non-professional uses.
Manufacturers & Suppliers
SNF SA
manufacturer
ZAC de Milieux 42163 Andrézieux France
+33 (0)4 77 36 86 00
Emergency Contacts
Emergency Contact
+33 (0)4 77 36 87 25
24-hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Notes
Contains no reportable hazardous substances.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. No hazards which require special first aid measures.
Wash off with plenty of water. Get medical attention if irritation develops and persists.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. Get medical attention.
Immediate Medical Attention
None reasonably foreseeable.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Water spray. Foam. Carbon dioxide (CO2). Dry powder.
None known.
No special protective measures against fire required.
Firefighter Protection
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so. Keep people away from spill/leak.
Do not flush with water. Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal.
Do not flush with water. Dam up. Soak up with inert absorbent material. Clean up promptly by scoop or vacuum.
As with all chemical products, do not flush into surface water.
Soak up with inert absorbent material. Sweep up and shovel (small spills). Clean up promptly by scoop or vacuum (large spills). Flush away traces with water (residues).
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Renders surfaces extremely slippery when spilled.
Keep container tightly closed. Freezing will affect the physical condition and may damage the material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local exhaust if misting occurs. Natural ventilation is adequate in absence of mists.
Impervious gloves.
Safety glasses with side-shields.
Not required; except in case of aerosol formation.
Chemical resistant apron or protective suit if splashing or repeated contact with solution is likely.
Do not allow uncontrolled discharge of product into the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
None known.
No dangerous reaction known under conditions of normal use.
Protect from frost, heat and sunlight.
None known.
Thermal decomposition may produce: carbon oxides (COx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLOSPERSE?
The signal word is no signal word.
What is the physical form of FLOSPERSE?
FLOSPERSE is a liquid appearing as clear to slightly yellow liquid. with clear to slightly yellow color. It has slight odor.
What is the solubility of FLOSPERSE?
Completely miscible in water.
What is FLOSPERSE used for?
Processing aid for industrial applications.
What is the melting point of FLOSPERSE?
The melting point is < 5°C and the boiling point is 100°C.