Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BAEROSTAB UBZ 660-4 RF
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of plastics products, Polymer additive, Stabilizer
Manufacturers & Suppliers
Baerlocher Italia S.p.A.
manufacturer
Via Colombano, 62/A, 26900 Lodi (LO) - Italia
Emergency Contacts
Baerlocher Italia S.p.A.
+39-0371/451-1
0 - 24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation contains barium- and zinc carboxylates in organic solvent.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol EC: 203-632-7 | 108-95-2 | 3% | Yes |
| Barium neodecanoate EC: 259-509-3 | 55172-98-0 | 20% | Yes |
| Fatty acids, C14-18 and C16-18-unsatd., barium salts EC: 305-998-4 | 95465-85-3 | 20% | Yes |
| Benzoic acid, barium salt EC: 208-551-0 | 533-00-6 | 20% | Yes |
| Zinc neodecanoate EC: 248-370-4 | 27253-29-8 | 20% | Yes |
| Isodecyl diphenyl phosphite EC: 247-777-4 | 26544-23-0 | 20% | Yes |
| Benzoic acid EC: 200-618-2 | 65-85-0 | 5% | Yes |
| 2-(2-Butoxyethoxy)ethanole EC: 203-961-6 | 112-34-5 | 20% | Yes |
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 918-481-9 | --- | 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with soap and plenty of water. Take off contaminated clothing and shoes immediately.
Rinse with plenty of water.
Consult a doctor and show this safety datasheet.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Foam, Carbon dioxide (CO2), Dry chemical, Sand
High volume water jet
Smoke and fumes, toxic.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition. Ensure adequate ventilation. Avoid contact with skin and eyes. Use personal protective equipment.
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking.
Store at room temperature in the original container. Keep container tightly closed in a dry and well-ventilated place.
Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust
protective gloves acc. to EN 374, e.g. neoprene, thickness: min. 0,7 mm
Safety glasses
In case of insufficient ventilation: Protective mask against solvent vapours (A2 Filter)
Long sleeved clothing, Rubber apron, antistatic shoes
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored normally.
Stable at normal ambient temperature and pressure.
Vapours may form explosive mixture with air.
Sources of ignition
Strong oxidizing agents
No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
See this safety data sheet chapter 6. - 8.
See this safety data sheet chapter 6. - 8.
See this safety data sheet chapter 6. - 8.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BAEROSTAB UBZ 660-4 RF?
The signal word is danger.
What is the physical form of BAEROSTAB UBZ 660-4 RF?
BAEROSTAB UBZ 660-4 RF is a liquid appearing as liquid with yellowish color. It has characteristic odor.
What is BAEROSTAB UBZ 660-4 RF used for?
Manufacture of plastics products, Polymer additive, Stabilizer
What are the hazard statements for BAEROSTAB UBZ 660-4 RF?
This substance has 8 hazard statements:
- H302 + H332: Harmful if swallowed or if inhaled
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H341: Suspected of causing genetic defects.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.