NextSDS Logo
Safety Data Sheet EN

ADRAFOC CR-B

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ADRAFOC CR-B

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Fire-resistant coating. For professional user /industrial user only.

Uses advised against

All uses not specified in this section or in section 7.3

Manufacturers & Suppliers

Assessors Del Ram d'Aigua, S.A. logo

Assessors Del Ram d'Aigua, S.A.

manufacturer

Verge dels Dolors, 11-17, E-08107 Martorelles - Barcelona - Spain

(+34) 935 93 11 83

http://www.adrasa.com

Emergency Contacts

Emergency Contact

(+34) 93 593 19 53

office hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances

Notes

None of the substances contained in the mixture are above the values fixed in Annex II of Regulation (EC) n°1907/2006

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In case of symptoms, move the person affected into fresh air.

Skin contact

In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of modifications on the skin (stinging, redness, rashes, blisters,...), seek medical advice with this Safety data Sheet

Symptoms: stinging, redness, rashes, blisters

Eye contact

Rinse with water until the product has been eliminated. In case of problems, consult a doctor with the SDS of this product.

Ingestion

In case of consumption in large quantities, it is recommended to seek medical assistance.

Immediate Medical Attention

In case of consumption in large quantities, it is recommended to seek medical assistance. In case of modifications on the skin (stinging, redness, rashes, blisters,...), seek medical advice with this Safety data Sheet. In case of problems, consult a doctor with the SDS of this product.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

ABC Powder, water

Specific hazards

Due to its non-flammable nature, the product does not present a fire risk under normal conditions of storage, manipulation and use.

Instructions

Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment. Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...) in accordance with Directive 89/654/EC.

Firefighter Protection

Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Sweep up and shovel product or other means and place in container for reuse (preferred) or disposal

Environmental

This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.

Cleanup methods

Sweep up and shovel product or other means and place in container for reuse (preferred) or disposal

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Comply with the current legislation concerning the prevention of industrial risks. Keep containers hermetically sealed. Control spills and residues, destroying them with safe methods. Avoid leakages from the container. Maintain order and cleanliness where dangerous products are used.

Storage

Avoid sources of heat, radiation, static electricity and contact with food.

Hygiene

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Fire prevention

Due to its non-flammable nature, the product does not present a fire risk under normal conditions of storage, manipulation and use.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Protective gloves against minor risks (CE CAT I). Replace gloves in case of any sign of damage. For prolonged periods of exposure to the product for professional users/industrials, we recommend using CE III gloves in line with standards EN 420 and EN 374.

Eyes

Panoramic glasses against liquid splash (CE CAT II). EN 166:2001, EN ISO 4007:2012. Clean daily and disinfect periodically according to the manufacturer's instructions. Use if there is a risk of splashing.

Respiratory

Filter mask for particles (CE CAT III). EN 149:2001+A1:2009. Replace when an increase in resistance to breathing is observed.

Skin/Body

Work clothing (CE CAT I). Anti-slip work shoes (CE CAT II, EN ISO 20347:2012).

Environmental

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container. For additional information see sub section 7.1.D

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Solubility
---
Bulk Density
---
Flammability
---
Density
1190 - 1210 kg/m³
Molecular Weight
---
Colour Intensity
---
Physical State
Solid
Lower Explosive Limit
Non-applicable
Physical State Data
solid
Ph
Non-applicable
Melting Point
300 - 310 °C
Solubility In Fat
---
Odor
---
Explosive Limits
---
State Under Standard Conditions
---
Voc Content
---
Boiling Point
Non-applicable
Cloud Point
---
Properties Status
---
Solubility In Water
Non-applicable
Metal Corrosion
---
Vapor Pressure
Non-applicable
Odor Threshold
---
Flash Point
Non Flammable (>60 °C)
Vapor Density
Non-applicable
Crystallisation Point
---
Kinematic Viscosity
Non-applicable
Decomposition Temperature
Non-applicable
Dynamic Viscosity
Non-applicable
Solidification Point
---
Softening Point
---
Relative Density
Non-applicable
Appearance
Powdery
Upper Explosive Limit
Non-applicable
Colour
White
Evaporation Rate
Non-applicable
Form
---
Auto Ignition Temperature
Non-applicable
Partition Coefficient
Non-applicable
Freezing Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Chemically stable under the conditions of storage, handling and use.

Reactivity

No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7.

Hazardous reactions

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Avoid

Shock and friction: Not applicable, Contact with air: Not applicable, Increase in temperature: Not applicable, Sunlight: Not applicable, Humidity: Not applicable

Incompatible

Avoid strong acids, Avoid alkalis or strong bases

Decomposition

See sub section 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic compounds.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ADRAFOC CR-B?

The signal word is no signal word.

What is the physical form of ADRAFOC CR-B?

ADRAFOC CR-B is a solid appearing as powdery with white color.

What is ADRAFOC CR-B used for?

Fire-resistant coating. For professional user /industrial user only.

What is the melting point of ADRAFOC CR-B?

The melting point is 300 - 310 °C and the boiling point is Non-applicable.