Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3-Methyl-1-pentene
- Product Code
- M0575
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagents.
Manufacturers & Suppliers
TCI EUROPE N.V.
manufacturer
Boerenveldseweg 6, Haven 1063, B-2070 Zwijndrecht
+32(0)3 735 07 00
Emergency Contacts
Emergency Contact
+32(0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3-Methyl-1-pentene EC: 212-076-4 | 760-20-3 | 98% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.
Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, foam, carbon dioxide.
Water (It may scatter and spread fire.)
Carbon dioxide, Carbon monoxide
Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. In case of fire in the surroundings: Keep containers cool by spraying with water. Eliminate all ignition sources if safe to do so.
Firefighter Protection
When extinguishing fire, be sure to wear personal protective equipment
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc. Fire-extinguishing devices should be prepared in case of a fire.
contain a spill by bunding
Prevent product from entering drains
Absorb spilled material in dry sand or inert absorbent before recovering it into an airtight container.
Materials: dry sand or inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent generation of vapour or mist. Keep away from heat/sparks/open flame/hot surfaces. -No smoking. Take measures to prevent the build up of electrostatic charge. Use explosion-proof equipment. Wash hands and face thoroughly after handling. Avoid contact with skin, eyes and clothing.
Keep container tightly closed. Store in a cool, dark and well-ventilated place. Store locked up.
Wash hands and face thoroughly after handling.
Keep away from heat/sparks/open flame/hot surfaces. -No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Install a closed system or local exhaust.
Impervious gloves.
Safety goggles. A face-shield, if the situation requires.
Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied air respirator, etc. Use respirators approved under appropriate government standards and follow local and national regulations.
Impervious protective clothing. Protective boots, if the situation requires.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under proper conditions.
No data available
No special reactivity has been reported.
Spark, Open flame, Static discharge
Oxidizing agents
Carbon dioxide, Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2288
- Shipping Name
- Isohexene
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3-Methyl-1-pentene?
The signal word is danger.
What is the physical form of 3-Methyl-1-pentene?
3-Methyl-1-pentene is a liquid with colorless - almost colorless color.
What is 3-Methyl-1-pentene used for?
Reagents.
What are the hazard statements for 3-Methyl-1-pentene?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.