Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TIP TAP AEROSOL
- Product Form
- AEROSOL
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Cutting oil
Uses advised against
No uses advised against known
Manufacturers & Suppliers
Novatio
distributor
Industrielaan 5B, B-2250 Olen
+32 14 25 76 40
Novatech International N.V.
manufacturer
Industrielaan 5B, B-2250 Olen
+32 14 85 97 37
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| distillates (petroleum), hydrotreated heavy naphthenic EC: 265-155-0 | 64742-52-5 | 25% | Yes |
| distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 30% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim into fresh air. In case of respiratory problems, consult a doctor/medical service.
Symptoms: No effects known.
If possible, wipe up/dry remove chemical. Soap may be used.
Symptoms: No effects known.
Rinse immediately with (lukewarm) water. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, consult a doctor/medical service.
Symptoms: No effects known.
Rinse mouth with water. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.
Symptoms: No effects known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Small fire: Water, Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting CO2 extinguisher. Major fire: Quantities of water.
Upon combustion: CO and CO2 are formed. Pressurised container: May burst if heated.
If exposed to fire cool the closed containers by spraying with water. Physical explosion risk: extinguish/cool from behind cover. Do not move the load if exposed to heat. After cooling: persistent risk of physical explosion.
Firefighter Protection
Gloves (EN 374). Protective clothing (EN 14605 or EN 13034). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Exposure to fire/heat: have neighbourhood close doors and windows.
Take up liquid spill into absorbent material. Scoop absorbed substance into closing containers. Carefully collect the spill/leftovers.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Gas/vapour heavier than air at 20°C.
Storage temperature: < 50 °C. Meet the legal requirements. Store in a cool area. Keep container in a well-ventilated place. Protect against frost. Keep out of direct sunlight. Fireproof storeroom.
Observe normal hygiene standards.
Keep away from naked flames/heat. Keep away from ignition sources/sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly.
Protective gloves against chemicals (EN 374). Materials: nitrile rubber, Measured breakthrough time: >480 minutes, Thickness: 0.35 mm, Protection index: Class 6
Protective goggles (EN 166).
Full face mask with filter type A at conc. in air > exposure limit.
Protective clothing (EN 14605 or EN 13034).
See sections 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
May be ignited by sparks. Gas/vapour spreads at floor level: ignition hazard.
No data available.
Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks.
No data available.
Upon combustion: CO and CO2 are formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- aerosols
- Transport Class
- 2
190, 277, 327, 344, 381, 63, 959
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TIP TAP AEROSOL?
The signal word is danger.
What is the physical form of TIP TAP AEROSOL?
TIP TAP AEROSOL is a aerosol with brown color. It has characteristic odour odor.
What is the solubility of TIP TAP AEROSOL?
Water ; insoluble
What is TIP TAP AEROSOL used for?
Cutting oil
What are the hazard statements for TIP TAP AEROSOL?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of TIP TAP AEROSOL?
The melting point is No data available in the literature and the boiling point is -42 °C.