Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP RAL ACRYL SPRAY various colours
- Product Code
- 07000 - 07239, M00113alt, M00105alt - M00107alt
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); PC9a Coatings and paints, thinners, paint removers; PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Lacquer
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
European Aerosols GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49 (0) 6266 750
Emergency Contacts
European Aerosols GmbH
+49 6266-75-310
Mo - Th 08:00 am - 04:00 pm, Fr 08:00 am - 00:30 pm
Public emergency phone no
111
Only for healthcare professionals
0344 892 0111
Poison center if child's have been poisoned
01 809 2166
8:00 am - 10:00 pm, 7 days
Only for healthcare professionals
01 809 2566
24 h / 7 days
Tox Info Suisse
145
24-h-emergency number
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 12.5 - 20% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 12.5% | Yes |
| butane (containing < 0,1 % butadiene (203-450-8)) EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 5 - 10% | Yes |
| isobutane (containing < 0,1 % butadiene (203-450-8)) EC: 200-857-2 | 75-28-5 | 2.5 - 5% | Yes |
| cellulose nitrate | 9004-70-0 | 2.5 - 5% | Yes |
| xylene EC: 905-588-0 | --- | 2.5% | Yes |
| titanium dioxide EC: 236-675-5 | 13463-67-7 | 2.5% | Yes |
| ethanol EC: 200-578-6 | 64-17-5 | 2.5% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0,1% (Note P Annex 1A 1272/2008 EU), so the classification as carcinogen need not to apply. xylene: Contains ethylbenzene CAS 100-41-4. CAS 9004-70-0: GB CLP Note T.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away. Keep away from ignition sources.
Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to item 13.
Related Products
Similar products with comparable safety profiles
MOTIP RAL ACRYL SPRAY various colours
---
MOTIP RAL ACRYL SPRAY Clear Coat
---
MOTIP SprayPlast different colours 400ml
---
MOTIP Industrial Coatings RAL colors 400ml
---
MOTIP HYBRID COLORS WHITE RAL 9010 400 ML
---
RAL Acrylic Spray
---
MOTIP® HYBRID COLORS GLOSS PURE WHITE RAL 9003 400 ML
---
MOTIP SEMI GLOSS BLACK 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air). Ensure good ventilation/exhaustion at the workplace.
Observe official regulations on storing packagings with pressurised containers. Keep container tightly sealed.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Material of gloves: Butyl rubber, BR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. Butyl rubber gloves with a thickness of 0.4 mm are solvent resistant for 42-480 minutes. As protective measure, we recommend that users and responsible persons for work safety assume solvent resistance length of 42 minutes. Considering the data in section 3 of this SDS, one can assume longer resistance length in particular cases.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Light weight protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- 1950 AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP RAL ACRYL SPRAY various colours?
The signal word is danger.
What is the physical form of MOTIP RAL ACRYL SPRAY various colours?
MOTIP RAL ACRYL SPRAY various colours is a aerosol appearing as according to product specification with according to product specification color. It has characteristic odor.
What is MOTIP RAL ACRYL SPRAY various colours used for?
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); PC9a Coatings and paints, thinners, paint removers; PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Lacquer
What are the hazard statements for MOTIP RAL ACRYL SPRAY various colours?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of MOTIP RAL ACRYL SPRAY various colours?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..