Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Blow Jet
- Product Code
- 86938
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent / Cleaner
Manufacturers & Suppliers
KENT (United Kingdom) Ltd
manufacturer
Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US
+44 01383 723344 / 0800 136925
Emergency Contacts
KENT (United Kingdom) Ltd
+44 01383 723344
Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Instantly wash with water and soap and rinse thoroughly. Generally the product is not skin irritating.
Rinse opened eye for several minutes under running water.
In case of persistent symptoms consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water haze. Fight larger fires with water haze or alcohol-resistant foam.
Water with a full water jet.
No further relevant information available.
Use fire fighting measures that suit the environment.
Firefighter Protection
Put on breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected persons away.
Do not allow product to reach sewage system or water bodies.
Allow material to evaporate.
Related Products
Similar products with comparable safety profiles
MASTER BLOWING AGENT 60405
---
JET A-1
UFI: 73J8-RP0K-V80A-8X2W
JET A-1
UFI: U500-50UH-Q00E-G7U5
JET A-1
CAS: 64742-81-0 ; 91770-15-9 ; 8008-20-6
Blowerproof liquid
---
ORIGIO® Sequential Blast™
---
JAC 2 – AEROSOL
UFI: GM00-E0FY-D00V-1GV6
MFX3027 - SMOKEBUBBLE BLASTER Smoke Fluid
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Wear suitable gloves tested to EN 374, Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.5 mm. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses (EN 166)
Only during spraying without adequate removal by suction. Filter A2 / P2 (EN 14387)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow 'separated from' class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Blow Jet?
The signal word is danger.
What is the physical form of Blow Jet?
Blow Jet is a aerosol appearing as colourless with colourless color. It has odourless odor.
What is Blow Jet used for?
Cleaning agent / Cleaner
What are the hazard statements for Blow Jet?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of Blow Jet?
The melting point is Not determined and the boiling point is Not applicable, as aerosol.