Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Metal Etching Pen
- Synonyms
- Metal Etching Pen
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For Corrosive materials.
Manufacturers & Suppliers
Flexbar Machine Corporation
manufacturer
250 Gibbs Road, Islandia, NY 11749 USA
Emergency Contacts
Flexbar Machine Corporation
631-582-8440
Chemtrec
1-800-424-9300
Chemtrec
1-703-527-3887
Emergency Contact
(610) 497-9000
8:00am-4:00pm EST
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrochloric acid | 0007647-01-0 | 25 - 50% | Yes |
| Sulfuric acid | 0007664-93-9 | 5 - 10% | Yes |
| Nitric acid | 0007697-37-2 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped, give artificial respiration. If unconscious place in the recovery position and obtain immediate medical attention. Give nothing by mouth.
Symptoms: Harmful if inhaled. May cause respiratory irritation.
Immediately flush the area with large amounts of water for at least 15 minutes, while removing contaminated clothing. Launder clothing before re-use. Call a physician.
Symptoms: Causes severe skin burns and eye damage.
Irrigate copiously with clean fresh water for at least 15 minutes, holding the eyelids apart and seek medical attention.
Symptoms: Causes serious eye damage.
Do NOT induce vomiting. Rinse mouth and slowly drink several glasses of water. Call a physician. Do NOT give anything by mouth to an unconscious or convulsing person.
Symptoms: May be harmful if swallowed.
Immediate Medical Attention
In case of skin irritation, eye irritation, see a doctor. Obtain immediate medical attention if unconscious. Call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Non combustible.
High temperatures produce toxic hydrogen chloride fumes and will react with water or steam to produce heat and toxic and corrosive fumes. Flammable and potentially explosive hydrogen gas is generated from reaction with most metals.
Firefighter Protection
Avoid breathing dust / fume / gas / mist / vapors / spray.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use good personal hygiene practices. Wash hands before eating, drinking, smoking or using toilet. Promptly remove soiled clothing and wash thoroughly before reuse.
Wipe off material with cloth or wash off with water.
Do not allow spills to enter drains or waterways.
Wipe off material with cloth or wash off with water.
Materials: cloth, water, soda ash or lime
Related Products
Similar products with comparable safety profiles
BRILLIANT SILVER LITHO/ETCHING INK
---
Artline Permanent Marker
---
ARCHIVAL WARM BLACK ETCHING INK
---
Metal Polish
UFI: SJPV-J00T-A000-Q6FM
Ballpen Ink Black
---
Interprime 160 Pale Blue Etch Solution
---
Caligo Safe-Wash Etching Inks
---
LEFRANC BOURGEOIS CHARBONNEL ETCHING INK P3
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep out of children's reach
Keep a cover (lid) closed over the marker and place in the normal room temperature
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Forced Mechanical Exhaust Recommended
Use neoprene or rubber gloves or PVC.
Wear a full face shield if mixing or pouring this material.
Keep distance (around 12 inch) on writing or marking.
Overalls which cover the body, arms and legs should be worn. Skin should not be exposed. All parts of the body should be washed after contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal circumstances.
Hazardous Polymerization will not occur. Reacts with some bases.
Indirect contact with skin. Self-contained breathing apparatus should be used to prevent inhalation of gases. Water fog will be most effective for controlling vapors.
Most metals, alkalis, metallic oxides, amines, esters, carbonates, cyanides, sulfides, and water reactive materials.
High temperatures produce toxic hydrogen chloride fumes and will react with water or steam to produce heat and toxic and corrosive fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Metal Etching Pen known by?
Metal Etching Pen is also known as: Metal Etching Pen
What is the hazard signal word for Metal Etching Pen?
The signal word is danger.
What is the physical form of Metal Etching Pen?
Metal Etching Pen is a liquid appearing as light yellow liquid . It has hydrochloric acid smell. odor.
What is Metal Etching Pen used for?
For Corrosive materials.
What are the hazard statements for Metal Etching Pen?
This substance has 5 hazard statements:
- H303: May be harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H318: Causes serious eye damage.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Metal Etching Pen?
The melting point is Not Measured and the boiling point is 212 F (100 C).