NextSDS Logo
Safety Data Sheet EN

PRO LSPR 6PK STRIPE YELLOW

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PRO LSPR 6PK STRIPE YELLOW
Product Code
2548838
Synonyms
Professional Inverted Striping Paint Yellow

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Striping Paint/Aerosols

Manufacturers & Suppliers

R

Rust-Oleum Corporation

manufacturer

11 Hawthorn Parkway, Vernon Hills, IL 60061, USA

R

Rust-Oleum Corporation

national supplier

11 Hawthorn Parkway, Vernon Hills, IL 60061, USA

Emergency Contacts

24 Hour Hotline

847-367-7700

24 Hour

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Eye Irrit. Cat. 2A H319
Muta. Cat. 1B H340
Carc. Cat. 1A H350
Repr. Cat. 1B H360
STOT RE Cat. 2 H373

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurized container: may burst if heated.
H319 Causes serious eye irritation.
H340 May cause genetic defects.
H350 May cause cancer.
H360 May damage fertility or the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe dust, fumes, gas, mist, vapours, or spray.
P264 Wash thoroughly after handling.
P280 Wear protective gloves, protective clothing, eye protection, and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice.
P314 Get medical advice or attention if you feel unwell.
P405 Store locked up.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F.
P501 Dispose of contents and container in accordance with local, regional and national regulations.
If eye irritation persists: Get medical help.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Naphtha, Petroleum, Hydrotreated Light 64742-49-0 10 - 30% Yes
Propane 74-98-6 10 - 30% Yes
n-Butane 106-97-8 3 - 7% Yes
Acetone 67-64-1 3 - 7% Yes
Xylenes (o-, m-, p- Isomers) 1330-20-7 3 - 7% Yes
n-Butyl Acetate 123-86-4 1 - 5% Yes
Titanium Dioxide 13463-67-7 1 - 5% No
Hydrotreated Light Distillate 64742-47-8 1 - 5% Yes
Ethylbenzene 100-41-4 0.5 - 1.5% Yes
Dimethyl Carbonate 616-38-6 0.5 - 1.5% Yes
Octane 111-65-9 0.1 - 1% Yes
n-Heptane 142-82-5 0.1 - 1% Yes
Zirconium 2-Ethylhexanoate 22464-99-9 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.

Skin contact

Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persists.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical attention. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

If swallowed, do not induce vomiting. If victim is conscious and alert, give 2 to 4 cupfuls of water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get medical attention for eye contact, skin contact (if irritation develops or persists), inhalation, and ingestion. Call a physician or poison control center immediately for ingestion.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
N.D.
Colour
Yellow
Form
---
Metal Corrosion
---
Dynamic Viscosity
---
Density
---
Relative Evaporation Rate
---
Molecular Weight
---
Voc Content
---
Upper Explosive Limit
13.0
Ph
N.A.
Solubility
---
Kinematic Viscosity
N.D.
Melting Point
N.D.
Flammability
Supports Combustion
Explosive Limits
---
Odor Threshold
N.E.
Evaporation Rate
Faster than Ether
Relative Density
0.933
Softening Point
---
Solidification Point
---
Solubility In Fat
---
Bulk Density
---
Boiling Point
-37 - 537
Vapor Pressure
N.D.
Decomposition Temperature
N.D.
Lower Explosive Limit
0.9
Physical State Data
liquid
Vapor Density
Heavier than Air
Solubility In Water
Slight
Freezing Point
N.D.
Odor
Solvent Like
Cloud Point
---
Properties Status
---
State Under Standard Conditions
---
Flash Point
-96
Appearance
---
Colour Intensity
---
Crystallisation Point
---
Partition Coefficient
N.D.
Physical State
Liquid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is PRO LSPR 6PK STRIPE YELLOW known by?

PRO LSPR 6PK STRIPE YELLOW is also known as: Professional Inverted Striping Paint Yellow

What is the hazard signal word for PRO LSPR 6PK STRIPE YELLOW?

The signal word is danger.

What is the physical form of PRO LSPR 6PK STRIPE YELLOW?

PRO LSPR 6PK STRIPE YELLOW is a liquid with yellow color. It has solvent like odor.

What is PRO LSPR 6PK STRIPE YELLOW used for?

Striping Paint/Aerosols

What are the hazard statements for PRO LSPR 6PK STRIPE YELLOW?

This substance has 7 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: may burst if heated.
  • H319: Causes serious eye irritation.
  • H340: May cause genetic defects.
  • H350: May cause cancer.
  • H360: May damage fertility or the unborn child.
  • H373: May cause damage to organs through prolonged or repeated exposure.

What is the melting point of PRO LSPR 6PK STRIPE YELLOW?

The melting point is N.D. and the boiling point is -37 - 537.