Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Motip Fluorescent Spray
- Product Code
- 04020, 04021, 04022, 04023, 04024
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category PC9a Coatings and paints, thinners, paint removers; Process category PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Lacquer
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
European Aerosols GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49 (0) 6266 750
Emergency Contacts
Emergency Contact
+49 6266-75-310
Mo - Th 08:00 am - 04:00 pm, Fr 08:00 am - 00:30 pm
Public emergency phone no
111
Only for healthcare professionals
0344 892 0111
Poison center if childs have been poisoned
01 809 2166
8:00 am - 10:00 pm, 7 days
Only for healthcare professionals
01 809 2566
24 h / 7 days
Tox Info Suisse
145
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether | 115-10-6 | 25 - 50% | Yes |
| Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics EC: 920-750-0 | --- | 25 - 50% | Yes |
| propane | 74-98-6 | 12.5 - 20% | Yes |
| butane (containing < 0,1 % butadiene (203-450-8)) | 106-97-8 | 12.5 - 20% | Yes |
| Hydrocarbons, C6-C7, Isoalkane, Cyclics, <5%n-Hexane EC: 926-605-8 | --- | 5 - 10% | Yes |
| isobutane (containing < 0,1 % butadiene (203-450-8)) | 75-28-5 | 2.5 - 5% | Yes |
| 1-pentanol | 71-41-0 | 2.5% | Yes |
| titanium dioxide | 13463-67-7 | 1% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0,1% (Note P Annex 1A 1272/2008 EU), so the classification as carcinogen need not to apply.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away. Keep away from ignition sources.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to item 13.
Related Products
Similar products with comparable safety profiles
Motip Fluorescent Spray
---
Motip Sprayplast 500ml
---
METAFLUX 70-3500 ROST-I-SOL®-Spray
---
MFW30/G Spray Dried Flux
---
Aerospray® TB Reagent A, Fluorescence Decolorizer Concentrate
---
MOTIP SprayPlast different colours 400ml
---
MOTIP PTFE SPRAY 500 ML
---
MOTIP PTFE SPRAY 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air). Ensure good ventilation/exhaustion at the workplace.
Observe official regulations on storing packagings with pressurised containers. Keep container tightly sealed.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Not required.
Not required.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Light weight protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Warning: Gases.
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow 'separated from' class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Motip Fluorescent Spray?
The signal word is danger.
What is the physical form of Motip Fluorescent Spray?
Motip Fluorescent Spray is a aerosol with according to product specification color. It has characteristic odor.
What is Motip Fluorescent Spray used for?
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category PC9a Coatings and paints, thinners, paint removers; Process category PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Lacquer
What are the hazard statements for Motip Fluorescent Spray?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Motip Fluorescent Spray?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..