Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Wire electrode for electrical discharge machining
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Electrical discharge machining
Manufacturers & Suppliers
Thermocompact
manufacturer
181, Route de Sarves - Metz-Tessy - CS 70021, PRINGY CEDEX, 74371 - FRANCE
+33 (0)4 50 27 20 02
http://www.thermocompact.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of inhalation of fumes of molten material or dust: Move the affected person away from the contaminated area and into the fresh air. Get medical advice/attention.
Remove all contaminated clothing and footwear. Rinse with plenty of water. If case of redness or irritation, call a doctor.
Symptoms: redness or irritation
Immediately flush eyes thoroughly with water for at least 15 minutes. Consult an eye specialist.
If the person is fully conscious, make him/her drink plenty of water. Never give an unconscious person anything to drink. Get medical advice/attention.
Immediate Medical Attention
Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Special powder against metallic fire (Class D).
Not classified as flammable according to EC criteria, but may present a risk in the event of a fire. Potential dust explosion hazard from airborne release.
Contain the extinguishing fluids by bunding. Do not breathe fumes.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes.
Do not discharge into drains or rivers.
Gather the product and place it in a spare container that has been suitably labeled.
Related Products
Similar products with comparable safety profiles
NIC-L-WELD™ 59 ELECTRODE
---
NIC-L-WELD™ 99 ELECTRODE
---
Tungsten wire
CAS: 7440-33-7
Lead wire
CAS: 7439-92-1
5356 Aluminum Welding and Metallizing Wire
---
AlcoTec ALMIGWELD, AlcoTec ALTIGWELD, Aluminum Metallizing Wire, AlumaArc
---
Electrode Cleaning Solution for General Use
CAS: 7647-01-0
BrazeTec Soldaflux Z
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid contact with skin and eyes. Do not breathe dust.
Keep container tightly closed. Protect from moisture. Store in a dry, cool place.
Do not drink, eat or smoke in the workplace. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Breakthrough time : refer to the recommendations of the supplier
Safety glasses with side shields
Not necessary with sufficient ventilation
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use.
To our knowledge, the product does not present any particular risk, under normal conditions of use.
No dangerous reactions known under normal conditions of use.
Water, humidity. Avoid raising powdered material due to explosion hazard.
Strong bases. Strong oxidizing agents. Halogenated compounds. Ammonia. Alkali metals. Halogenated hydrocarbons.
On contact with acid releases: Hydrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Wire electrode for electrical discharge machining?
The signal word is no signal word.
What is the physical form of Wire electrode for electrical discharge machining?
Wire electrode for electrical discharge machining is a solid with colorless color. It has odorless odor.
What is the solubility of Wire electrode for electrical discharge machining?
Water: Solubility in water of component(s) of the mixture : • Copper: Insoluble • zinc: Insoluble
What is Wire electrode for electrical discharge machining used for?
Electrical discharge machining
What is the melting point of Wire electrode for electrical discharge machining?
The melting point is No data available and the boiling point is No data available.