NextSDS Logo
Safety Data Sheet EN

BIO CHAIN OIL

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BIO CHAIN OIL
Product Code
ARD075014

Regulatory Identifiers

CAS Number
N/A

Identified Uses

SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) - Product category PC24 Lubricants, greases, release products Process category PROC7 Industrial spraying PROC8a Transfer of substance or preparation (charging/discharging) from /to vessels/large containers at non-dedicated facilities PROC8b Transfer of substance or preparation (charging/discharging) from /to vessels/large containers at dedicated facilities PROC9 Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC10 Roller application or brushing PROC11 Non industrial spraying PROC13 Treatment of articles by dipping and pouring Environmental release category ERC4 Industrial use of processing aids in processes and products, not becoming part of articles ERC8a Wide dispersive indoor use of processing aids in open systems ERC8d Wide dispersive outdoor use of processing aids in open systems Application of the substance / the mixture Lubricating oil

Manufacturers & Suppliers

manufacturer

+3256726229

Emergency Contacts

Emergency Contact

+3256726229

9 AM to 4 PM, Monday to Friday

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Dangerous components: Void

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Generally the product does not irritate the skin.

Eye contact

Rinse opened eye for several minutes under running water.

Ingestion

Do not induce vomiting; call for medical help immediately.

Immediate Medical Attention

Consult doctor in case of complaints; call for medical help immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear gloves for the protection against chemicals according to EN 374. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: For continuous contact we recommend gloves with breakthrough time of more than 240 minutes with preference for >480 minutes where suitable gloves can be identified. For short-term/splash protection we recommend the same, but recognise that suitable gloves offering this level of protection may not be available and in this case a lower breakthrough time may be acceptable so long as appropriate maintenance and replacement regimes are followed. Glove thickness is not a good predictor of glove resistance to a chemical as it is dependent on the exact composition of the glove material. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Goggles recommended during refilling

Respiratory

Not required.

Skin/Body

Protective work clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Light brown
Colour Intensity
---
Form
Fluid
Odor
Characteristic
Odor Threshold
---
Ph
---
Melting Point
Undetermined.
Boiling Point
Undetermined.
Flash Point
260 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0.911 g/cm³
Flammability
---
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Not miscible or difficult to mix.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
150 mm²/s (ASTM D445)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BIO CHAIN OIL?

The signal word is no signal word.

What is the physical form of BIO CHAIN OIL?

BIO CHAIN OIL is a liquid with light brown color. It has characteristic odor.

What is BIO CHAIN OIL used for?

SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) - Product category PC24 Lubricants, greases, release products Process category PROC7 Industrial spraying PROC8a Transfer of substance or preparation (charging/discharging) from /to vessels/large containers at non-dedicated facilities PROC8b Transfer of substance or preparation (charging/discharging) from /to vessels/large containers at dedicated facilities PROC9 Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC10 Roller application or brushing PROC11 Non industrial spraying PROC13 Treatment of articles by dipping and pouring Environmental release category ERC4 Industrial use of processing aids in processes and products, not becoming part of articles ERC8a Wide dispersive indoor use of processing aids in open systems ERC8d Wide dispersive outdoor use of processing aids in open systems Application of the substance / the mixture Lubricating oil

What is the melting point of BIO CHAIN OIL?

The melting point is Undetermined. and the boiling point is Undetermined..