NextSDS Logo
Safety Data Sheet EN

CIRKAN C 220

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CIRKAN C 220
Product Code
091275

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

T

TotalEnergies Marketing Asia-Pacific Middle East Pte. Ltd.

national supplier

182 Cecil Street, #27-01 Frasers Tower, Singapore 069547

+65 6879 2200

T

TotalEnergies Lubrifiants

manufacturer

562 Avenue du Parc de L'ile, 92029 Nanterre Cedex FRANCE

+33 (0)1 41 35 40 00

Emergency Contacts

Asia-Pacific

+65 3158 1074

Middle-East

+44 1235 239671

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

No known significant effects or critical hazards.

Precautionary Statements

Not applicable.
Not applicable.
Not applicable.
Not applicable.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Paraffin oils (petroleum), catalytic dewaxed heavy 64742-70-7 10 - 25% No

Occupational exposure limits, if available, are listed in Section 8.

Notes

There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.

Symptoms: No known significant effects or critical hazards. No specific data.

Skin contact

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.

Symptoms: No known significant effects or critical hazards. No specific data.

Eye contact

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.

Symptoms: No known significant effects or critical hazards. No specific data.

Ingestion

Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.

Symptoms: No known significant effects or critical hazards. No specific data.

Immediate Medical Attention

Get medical attention if symptoms occur. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment.

Small spill

Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material.

Materials: inert dry material, sand, earth, vermiculite or diatomaceous earth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8).

Storage

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Voc Content
---
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Metal Corrosion
---
Crystallisation Point
---
Evaporation Rate
Not available
Relative Evaporation Rate
---
Cloud Point
---
Partition Coefficient
Not applicable
Explosive Limits
---
Colour
Brown
Kinematic Viscosity
Kinematic (40°C (104°F)): 219.1 mm2/s (219.1 cSt) [ASTM D 445]
Odor
Characteristic
Molecular Weight
---
Flammability
Not available
Colour Intensity
---
Softening Point
---
Form
---
Decomposition Temperature
Not available
Solubility In Water
Not soluble
Physical State Data
liquid
Auto Ignition Temperature
Not available
Bulk Density
---
Dynamic Viscosity
---
Flash Point
Open cup: 258°C (496.4°F) [ASTM D 92]
Vapor Density
Not available
Appearance
---
Vapor Pressure
Not available
State Under Standard Conditions
---
Boiling Point
Not available
Physical State
Liquid
Density
0.898 g/cm³ [15°C] [ASTM D 4052]
Relative Density
0.898 [ASTM D 4052]
Melting Point
Not available
Solubility
---
Properties Status
---
Freezing Point
---
Odor Threshold
Not available
Ph
Not available
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage and handling conditions (see Section 7).

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Incompatible

Strong oxidizing agents

Decomposition

Carbon dioxide. carbon monoxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CIRKAN C 220?

The signal word is no signal word.

What is the physical form of CIRKAN C 220?

CIRKAN C 220 is a liquid with brown color. It has characteristic odor.

What are the hazard statements for CIRKAN C 220?

This substance has 1 hazard statement:

  • No known significant effects or critical hazards.

What is the melting point of CIRKAN C 220?

The melting point is Not available and the boiling point is Not available.