Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARALDITE® GT 7072
- Product Code
- 400001010078
- Chemical Name
- reaction product: bisphenol a-(epichlorhydrin); epoxy resin (number average molecular weight > 1100)
Regulatory Identifiers
- CAS Number
- 25068-38-6 Check regulations →
- REACH No.
- Polymer
Identified Uses
Epoxy constituents
Manufacturers & Suppliers
Huntsman Advanced Materials (Europe)BVBA
global supplier
Everslaan 45 3078 Everberg Belgium
+41 61 299 20 41
Emergency Contacts
EUROPE
+32 35 75 1234
France ORFILA
+33(0)145425959
ASIA
+65 6336-6011
China
+86 20 39377888
China
+86 532 83889090
India
+ 91 22 42 87 5333
Australia
1800 786 152
New Zealand
0800 767 437
USA
+1/800/424.9300
NVIC
030 274 88 88
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
reaction product: bisphenol a-(epichlorhydrin); epoxy resin (number average molecular weight > 1100)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction product: bisphenol a-(epichlorhydrin); epoxy resin (number average molecular weight > 1100) | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with soap and plenty of water.
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
No data is available on the product itself.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid dust formation. Avoid breathing dust. Use personal protective equipment.
Do not contaminate surface water.
pick up with an electrically protected vacuum cleaner or by wet-brushing and transfer to a container for disposal according to local regulations (see section 13). Pick up and arrange disposal without creating dust.
Materials: suitable, closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation, ingestion and contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Avoid creating dust.
Keep container tightly closed in a dry and well-ventilated areas and containers place.
When using do not eat or drink. Wash hands before breaks and at the end of workday. Provide adequate ventilation. Do not breathe dust.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : butyl-rubber Nitrile rubber Neoprene PVC Break through time : > 8 h butyl-rubber Nitrile rubber Neoprene PVC 10 - 480 min Remarks : The suitability for a specific workplace should be discussed with the producers of the protective gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Safety glasses with side-shields
Respirator with a half face mask. Recommended Filter type: P1 filter
Dust impervious protective suit
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
Not classified as a reactivity hazard.
None known.
None known.
Strong acids and strong bases Oxidizing agents
No decomposition if stored normally. Carbon oxides Burning produces obnoxious and toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARALDITE® GT 7072?
The signal word is no signal word.
What is the physical form of ARALDITE® GT 7072?
ARALDITE® GT 7072 is a solid appearing as flakes with translucent color. It has odorless odor.
What is ARALDITE® GT 7072 used for?
Epoxy constituents
What is the melting point of ARALDITE® GT 7072?
The melting point is 82 - 90 °C .