Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LUBA-print 121/F (ND)
- Product Code
- B013
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Wax additive for paints and printing inks
Manufacturers & Suppliers
MÜNZING CHEMIE GmbH
manufacturer
Münzingstrasse 2 74232 Abstatt GERMANY
+49 7131 987-100
Emergency Contacts
Vergiftungs-Informations-Zentrale VIZ Freiburg
+49 761 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 50 - 75% | Yes |
| Hydrocarbons, C10, aromatics, <1% naphthalene EC: 918-811-1 | 64742-94-5 | 20 - 50% | Yes |
| naphthalene EC: 202-049-5 | 91-20-3 | 0.3% | Yes |
| 2-methoxypropyl acetate EC: 274-724-2 | 70657-70-4 | 0.3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take affected persons into fresh air and keep quiet. Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
Can form explosive gas-air mixtures.
Cool endangered receptacles with water spray.
Firefighter Protection
Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to penetrate the ground/soil. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in cool, dry place in tightly closed receptacles. Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in cool, dry place in tightly closed receptacles. Store in a cool location.
Keep ignition sources away - Do not smoke. Protect from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (2-methoxy-1-methylethyl acetate, Hydrocarbons, C10, aromatics, <1% naphthalene)
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LUBA-print 121/F (ND)?
The signal word is warning.
What is the physical form of LUBA-print 121/F (ND)?
LUBA-print 121/F (ND) is a liquid with white color. It has specific type odor.
What is LUBA-print 121/F (ND) used for?
Wax additive for paints and printing inks
What are the hazard statements for LUBA-print 121/F (ND)?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of LUBA-print 121/F (ND)?
The melting point is Undetermined. and the boiling point is ≈ 146 °C (01-2119475791-29).