SIRION VP 1080 C40

Move person to fresh air. If not breathing, give artificial respiration.

Immediately take off all contaminated clothing. Areas of the body that have - or are only even suspected of having - come into contact with the product must be rinsed immediately with plenty of running water and possibly with soap.

Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist.

Do not induce vomiting. Call a physician and/or transport to emergency facility immediately.

Water fog or fine spray. Dry chemical fire extinguishers. Carbon dioxide fire extinguishers. Foam.

Do not use water in a jet.

In case of fire, may produce hazardous decomposition products such as carbon monoxide, carbon dioxide, (dense) black smoke, aldehydes, organic acids.

Keep people away. Isolate fire and deny unnecessary entry. Soak thoroughly with water to cool and prevent re-ignition. Cool surroundings with water to localize fire zone.

Wear personal protection equipment. Remove all sources of ignition. Provide adequate ventilation.

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.

Wash with plenty of water.

Avoid exposure - obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not breathe vapour or mist. Do not ingest. Avoid release to the environment. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated.

Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source.

Wash thoroughly after handling.

Store and use away from heat, sparks, open flame or any other ignition source. Use only non-sparking tools.

Provide adequate ventilation.

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

Safety glasses with side shields.

In case of insufficient ventilation wear suitable respiratory equipment (gas mask filter ABEK).

Chemical-resistant protective suit.

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stable at ambient temperatures.

Stable at ambient temperatures.

Under normal conditions of storage and use, hazardous reactions will not occur.

Exposure to elevated temperatures can cause product to decompose. Avoid static discharge.

Acids. Bases. Avoid unintended contact with amines.

In case of fire, may produce hazardous decomposition products such as carbon monoxide, carbondioxide, (dense) black smoke, aldehydes, organic acids.