Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sudan black B (C.I. 26150)
- Product Code
- 0292
- Chemical Name
- Sudan black B (C.I. 26150)
Regulatory Identifiers
- CAS Number
- 4197-25-5 Check regulations →
- EC Number
- 224-087-1 Check regulations →
Identified Uses
It is not required to list the identified uses because the substance is not subject to registration according to REACH (< 1 t/a).
Uses advised against
Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household). Food, drink and animal feedingstuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Germany
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sudan black B (C.I. 26150) EC: 224-087-1 | 4197-25-5 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.
Rinse skin with water/shower.
Rinse cautiously with water for several minutes. In all cases of doubt, or when symptoms persist, seek medical advice.
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, foam, dry extinguishing powder, ABC-powder
water jet
Combustible.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe dust.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically. Control of dust.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid exposure. Avoid dust formation.
Store in a dry place.
Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. NBR (Nitrile rubber), >0,11 mm, >480 minutes (permeation: level 6)
Use safety goggle with side protection.
Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P2 (filters at least 94 % of airborne particles, colour code: White).
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
The product in the delivered form is not dust explosion capable; the enrichment of fine dust however leads to the danger of dust explosion.
Violent reaction with: strong oxidiser
There are no specific conditions known which have to be avoided.
There is no additional information.
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sudan black B (C.I. 26150)?
The signal word is warning.
What is the physical form of Sudan black B (C.I. 26150)?
Sudan black B (C.I. 26150) is a solid with dark brown - black color. It has odourless odor.
What is Sudan black B (C.I. 26150) used for?
It is not required to list the identified uses because the substance is not subject to registration according to REACH (< 1 t/a).
What are the hazard statements for Sudan black B (C.I. 26150)?
This substance has 1 hazard statement:
- H341: Suspected of causing genetic defects
What is the melting point of Sudan black B (C.I. 26150)?
The melting point is 120 – 124 °C and the boiling point is not determined.