Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Thiazolyl blue
- Product Code
- 4022
- Chemical Name
- Thiazolyl blue
Regulatory Identifiers
- CAS Number
- 298-93-1 Check regulations →
- EC Number
- 206-069-5 Check regulations →
Identified Uses
Laboratory chemical Laboratory and analytical use
Uses advised against
Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household). Food, drink and animal feedingstuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Germany
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Name of substance Thiazolyl blue Molecular formula C₁₈H₁₆BrN₅S Molar mass 414,3[g] /mol CAS No 298-93-1 EC No 206-069-5
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Thiazolyl blue EC: 206-069-5 | 298-93-1 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.
Symptoms: Cough, Dyspnoea
Rinse skin with water/shower. In case of skin irritation, consult a physician.
Symptoms: Irritation
Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. In case of eye irritation consult an ophthalmologist.
Symptoms: Irritation
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Symptoms: Nausea, Vomiting
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
co-ordinate firefighting measures to the fire surroundings! water, foam, alcohol resistant foam, dry extinguishing powder, ABC-powder
water jet
Combustible.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe dust.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically. Control of dust.
Related Products
Similar products with comparable safety profiles
Nitro Blue Tetrazolium (chloride)
CAS: 298-83-9
p-Nitrotetrazolium blue chloride
CAS: 298-83-9
Toluidine blue O
CAS: 92-31-9
Methylene Blue trihydrate
CAS: 7220-79-3
Methylene blue (C.I. 52015)
CAS: 61-73-4
Thioflavin T
CAS: 2390-54-7
Thioflavin T
CAS: 2390-54-7
Hydroxy naphthol blue disodium salt
CAS: 165660-27-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provision of sufficient ventilation. Avoid exposure. Avoid dust formation.
Store in a dry place.
Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. NBR (Nitrile rubber), material thickness: >0,11 mm, breakthrough times: >480 minutes (permeation: level 6)
Use safety goggle with side protection.
Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P2 (filters at least 94 % of airborne particles, colour code: White).
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
The product in the delivered form is not dust explosion capable; the enrichment of fine dust however leads to the danger of dust explosion.
Violent reaction with: strong oxidiser
Direct light irradiation.
There is no additional information.
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Thiazolyl blue?
The signal word is warning.
What is the physical form of Thiazolyl blue?
Thiazolyl blue is a solid with dark yellow color. It has odourless odor.
What is Thiazolyl blue used for?
Laboratory chemical Laboratory and analytical use
What are the hazard statements for Thiazolyl blue?
This substance has 4 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
- H341: Suspected of causing genetic defects
What is the melting point of Thiazolyl blue?
The melting point is 190 – 210 °C and the boiling point is not determined.