NextSDS Logo
Safety Data Sheet EN

Hexachlorobenzene

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Hexachlorobenzene

Regulatory Identifiers

CAS Number
N/A
02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Precautionary Statements

P264 Wash hands thoroughlyafter handling.
P273 Avoid release to the environment.
P302 + P352 IF ON SKIN: Wash withplentyof soapand water.
P304 + P340 IF INHALED: Remove victim to fresh air and keepat rest in aposition comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easyto do. Continue rinsing.
P312 Call a POISON CENTER or doctor/physician ifyou feel unwell.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritationpersists: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Hexachlorobenzene<br>**Assay:**100%

Chemical Name CAS Number Concentration Hazardous
Hexachlorobenzene 118-74-1 100% No

Notes

Not Relevant

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Skin contact

Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Ingestion

Wash out mouth with water.

Immediate Medical Attention

Call a POISON CENTER or doctor/physician if you feel unwell. No additional measures required

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, Dry chemical powder, Water.

Unsuitable media

Do not use water with a full water jet.

Specific hazards

In combustion toxic fumes may form.

Firefighter Protection

Wear protective clothing to prevent contact with skin and eyes. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not discharge into drains or rivers.

Cleanup methods

Mix with sand or vermiculite. Transfer to a suitable container.

Materials: sand or vermiculite

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in fume hood. Wash hands immediately after contamination. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P362: Take off contaminated clothing and wash before reuse.

Storage

Keep container tightly closed. Store in cool, well ventilated area. Keep in tightly closed container in cool area away from direct sunlight or heat sources. P403 + P233: Store in a well-ventilated place. Keep container tightly closed.

Hygiene

Wash hands immediately after contamination. P264: Wash hands thoroughly after handling. P362: Take off contaminated clothing and wash before reuse.

Fire prevention

normal measures for preventive fire protection

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

P271: Use only outdoors or in a well-ventilated area. Ensure there is sufficient ventilation of the area.

Hands

Protective gloves.

Eyes

Safety Glasses.

Respiratory

P261: Avoid breathing dust/fume/gas/mist/vapours/spray. Respiratory protection not required.

Skin/Body

Protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
solid
Colour
---
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
---
Melting Point
227-229°C
Boiling Point
323-326°C
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

no unusual reactivity

Hazardous reactions

no hazardous reactions known

Avoid

no specific conditions to avoid

Incompatible

Strong oxidizing agents.

Decomposition

In combustion emits toxic fumes. In combustion emits toxic fumes of carbon dioxide / carbon monoxide. In combustion emits toxic fumes of hydrogen chloride / phosgene.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2729
Shipping Name
Hexachlorobenzene
Transport Class
6.1
Packing Group
III
IMDG

For the purposes of documentation and package marking, the Proper Shipping Name shall be supplemented with the technical name (see 3.1.2.8.1).

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Hexachlorobenzene?

The signal word is no signal word.

What is the physical form of Hexachlorobenzene?

Hexachlorobenzene is a solid appearing as solid .

What is the melting point of Hexachlorobenzene?

The melting point is 227-229°C and the boiling point is 323-326°C.