Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 0.9% Sodium Chloride Irrigation Solution
- Product Code
- AKF7123, AKF7124, AZKF7123, AZKF7124, ERKF7123, ERKF7124, KKF7123, KKF7124, TKF7123, TKF7124, UKF7123, UKF7124
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Pharmaceutical. Irrigating solution
Uses advised against
No information available
Manufacturers & Suppliers
BAXTER HEALTHCARE CORPORATION
manufacturer
DEERFIELD, ILLINOIS 60015
0044 1635 206345
Emergency Contacts
Verisk 3E Global Incident Response Hotline
+1 760 476 3962
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention if symptoms occur.
In case of contact, immediately flush skin with plenty of water. Get medical attention if irritation develops.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately.
Immediate Medical Attention
Get medical attention if irritation develops (eyes/skin). Get medical attention if symptoms occur (inhalation). If large quantities of this material are swallowed, call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media suitable for surrounding materials.
No information available
Firefighter Protection
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow all fire fighting procedures (Section 5).
add absorbent (soil may be used in the absence of other suitable materials) scoop up material and place in a sealed, liquid-proof container for disposal.
dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Place spilled material in an appropriate container for disposal.
Do not allow material to contaminate ground water system.
add absorbent, scoop up material and place in a sealed, liquid-proof container for disposal.
Materials: absorbent (soil may be used in the absence of other suitable materials)
Related Products
Similar products with comparable safety profiles
0.9% Sodium Chloride Solution
---
Sodium Hypochlorite Solution
---
Sodium Hypochlorite Solution
---
Sodium Chloride
---
Sodium hypochlorite solution (15% or less)
---
SALINE SOLUTION
---
Sodium Chloride Standard Solution, 491 ± 2.5 mg/L
CAS: Not applicable
Sodium chloride 0.01 mol/l
CAS: 7647-14-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash thoroughly after handling.
Keep containers tightly closed in a cool, well-ventilated place. Store at room temperature 25 °C (77 °F). Avoid excessive heat.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special containment is required.
Use chemical resistant, impervious gloves.
Eye protection not required for normal final product use. Safety glasses with side-shields are recommended for laboratory and manufacturing use.
No personal respiratory protective equipment normally required.
Work uniform or laboratory coat.
Do not allow material to contaminate ground water system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions
No data available.
Polymerization: No information available. Hazardous Reactions: None under normal use conditions.
Do not freeze.
None known
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 0.9% Sodium Chloride Irrigation Solution?
The signal word is no signal word.
What is the physical form of 0.9% Sodium Chloride Irrigation Solution?
0.9% Sodium Chloride Irrigation Solution is a liquid. appearing as aqueous solution. with clear, colorless. color. It has not available odor.
What is the solubility of 0.9% Sodium Chloride Irrigation Solution?
Not available
What is 0.9% Sodium Chloride Irrigation Solution used for?
Pharmaceutical. Irrigating solution
What is the melting point of 0.9% Sodium Chloride Irrigation Solution?
The melting point is Not available and the boiling point is Not available.