Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OC-Control Low
- Product Code
- V-PH57, G-PH57, VMPH57, VTPH57
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Eiken Chemical Co., Ltd.
manufacturer
4-19-9, Taito, Taito-ku, Tokyo 110-8408, JAPAN
+81-3-5846-3479
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Human serum Sodium Azide
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium Azide | 26628-22-8 | 0.1% | Yes |
Notes
Contributing to the hazard: Sodium Azide < 0.1% (dry weight) CAS No.: 26628-22-8
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the victim to fresh air. Let him/her blow his/her nose, rinse his/her mouth out and keep at rest.
Wash with plenty of water.
Rinse cautiously with water for 15 minutes or longer.
Give plenty of tepid water and induce vomiting.
Immediate Medical Attention
Get medical attention immediately for inhalation and ingestion. If skin irritation occurs, seek medical advice/attention. If eye irritation persists, get medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, powder, CO₂, foam
Shut off the source of the fire. Use water, powder, CO₂ or other extinguishing media as appropriate for the nature of the blaze. In order to avoid inhaling the gases or smoke produced during combustion, extinguish the fire from an upwind position.
Firefighter Protection
wear breathing protection equipment
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not dispose of the spilled or leaked solution directly into a river or sewer. Pour out the solution together with a large volume of water.
Wipe up the solution with a waste or disposable cloth. Then wash it away with a large volume of water.
Materials: waste or disposable cloth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, mucous membranes, or clothes. Avoid getting into eyes. Wash hands thoroughly after handling.
Store this product in a cool, dark location at 2 – 10°C, and avoid freezing.
Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable with regard to heat, light, and physical impact.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Observe the contents of the “HANDLING AND STORAGE”. In addition, do not stack in such a way that the containers are damaged, and take steps to prevent possible cargo collapse.
Observe the contents of the “HANDLING AND STORAGE”. In addition, do not stack in such a way that the containers are damaged, and take steps to prevent possible cargo collapse.
Observe the contents of the “HANDLING AND STORAGE”. In addition, do not stack in such a way that the containers are damaged, and take steps to prevent possible cargo collapse.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OC-Control Low?
The signal word is no signal word.
What is the physical form of OC-Control Low?
OC-Control Low is a dry solid with slightly brown color. It has odorless odor.
What is the solubility of OC-Control Low?
Highly soluble in water