Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BinaxNOW™ Streptococcus pneumoniae and BinaxNOW™ Legionella Control Swabs
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional use only
Uses advised against
No additional information available
Manufacturers & Suppliers
Abbott Diagnostics Scarborough, Inc.
manufacturer
10 Southgate Road, Scarborough, Maine 04074 - United States
+1 (207) 730-5750
Emergency Contacts
Emergency Contact
+1-703-741-5970
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water.
Rinse eyes with water as a precaution.
Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam.
Firefighter Protection
Do not attempt to take action without suitable protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Avoid release to the environment.
Sweep or shovel spills into appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BinaxNOW™ Malaria Positive Control
---
Prolex™ Staph Positive Control Reagent
---
BD BACTEC™ Plus Aerobic/F Culture Vials
---
BIOBAN™ PH 100 Antimicrobial
CAS: 122-99-6
Liquichek™ Immunoassay Plus Control, Level 1
---
ZymoBIOMICS Spike-in Control II (Low Microbial Load)
---
BactT/ALERT® FA Bottle, BacT/ALERT® FN Bottle, BacT/ALERT® PF Bottle, BacT/ALERT® SA Bottle, BacT/ALERT® SN Bottle, BacT/ALERT® MP Bottle, BacT/ALERT® MB Bottle
---
Microban Additive IB10
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment.
Product must only be kept in the original packaging. Comply with instructions for use (refer to technical sheet).
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BinaxNOW™ Streptococcus pneumoniae and BinaxNOW™ Legionella Control Swabs?
The signal word is no signal word.
What is the physical form of BinaxNOW™ Streptococcus pneumoniae and BinaxNOW™ Legionella Control Swabs?
BinaxNOW™ Streptococcus pneumoniae and BinaxNOW™ Legionella Control Swabs is a solid with no data available color. It has no data available odor.
What is the solubility of BinaxNOW™ Streptococcus pneumoniae and BinaxNOW™ Legionella Control Swabs?
No data available
What is BinaxNOW™ Streptococcus pneumoniae and BinaxNOW™ Legionella Control Swabs used for?
For professional use only
What is the melting point of BinaxNOW™ Streptococcus pneumoniae and BinaxNOW™ Legionella Control Swabs?
The melting point is No data available and the boiling point is No data available.