Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Estrone calibrator 0
- Product Code
- DSL8700
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For In Vitro Diagnostic Use. See product literature for details.
Manufacturers & Suppliers
IMMUNOTECH s.r.o.
manufacturer
Radiová 1122/1, 102 00 Prague 10, Czech Republic
+420 272 017 444
Beckman Coulter, Inc.
global supplier
250 S. Kraemer Blvd, Brea, CA 92821, U.S.A.
800-854-3633
Beckman Coulter (UK) Ltd.
national supplier
Oakley Court, Kingsmead Business Park, London Road, High Wycombe, United Kingdom HP11 1JU
01494 441181
Beckman Coulter NZ
national supplier
Unit J, 33 Walmsley Road, Otahuhu, Auckland 1062, New Zealand
Beckman Coulter AB
national supplier
Ekbacksvägen 28, 168 69 Bromma, Sweden
+46 80564 85 900
Beckman Coulter Canada LP
national supplier
7075 Financial Drive, Mississauga, ON L5N 6V8, Canada
1-800-463-7828
Beckman Coulter Australia Pty Ltd
national supplier
23-27 Chaplin Drive, Lane Cove NSW 2066, Australia
Beckman Coulter Eurocenter SA
national supplier
22, rue Juste-Olivier, Case Postale 1044, CH-1260 Nyon 1, Switzerland
+41 (0)22 365 36 11
Cherubino Ltd
distributor
DELF Building, Sliema Road, Gzira, GZR 1637, Malta
+356 21343270
Emergency Contacts
Beckman Coulter Australia Pty Ltd
1800 060 881
Chemtrec
800-424-9300
Chemtrec
(001) 703-527-3887
Poison Centre
1-844-764-7669
Centre antipoison du Québec
1-800-463-5060
Emergency Call
999
National Poisons Information Centre
+353 (01) 809 2166
8:00 am to 10:00 pm 7 days a week
National Poisons Information Centre
+353 (01) 809 2566
24 hour service
24 Hour emergency contact
1800 060 881
24 Hour emergency number
0800 446 109
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium Azide EC: 247-852-1 | 26628-22-8 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration by trained personnel and obtain medical attention immediately.
In case of skin contact, rinse with water as a precaution.
If product enters eyes, rinse eyes gently with water as a precaution.
If product is ingested, rinse mouth with water. If irritation or discomfort occurs, obtain medical attention immediately.
Immediate Medical Attention
Obtain medical attention immediately if product is inhaled or if irritation or discomfort occurs after ingestion.
Medical Treatment
No specific medical attention or treatment required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire use carbon dioxide (CO2), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.
No special hazards determined.
Firefighter Protection
Self-contained breathing apparatus is recommended for firefighters in all chemical fire situations.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Observe general safety guidelines for protection during clean up procedures.
Contain spill to prevent migration.
Absorb liquid and place in container suitable for disposal. Avoid generation of aerosols during clean up.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
This product should be handled as though capable of transmitting infectious diseases. Universal precautions should be followed when using this product.
Store at 2 to 8°C, as directed on the product label. To maintain product quality, store according to the instructions in the product labeling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special engineering controls are required. Use with good general ventilation.
impervious gloves
Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.
Under normal conditions, the use of this product should not require respiratory protection.
protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in accordance with recommended storage conditions.
No further relevant information available.
Sodium azide forms explosive compounds with heavy metals. Repeated contact of low concentrations of azide with lead and copper commonly found in plumbing drains may result in the build up of shock sensitive compounds.
Avoid contact with incompatible materials. Avoid exposure to heat and direct sunlight.
Metals and metallic compounds
When stored as labeled, no known hazardous decomposition products are formed during the shelf-life of this product.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Estrone calibrator 0?
The signal word is no signal word.
What is the physical form of Estrone calibrator 0?
Estrone calibrator 0 is a liquid with light brown color. It has odorless odor.
What is Estrone calibrator 0 used for?
For In Vitro Diagnostic Use. See product literature for details.