NextSDS Logo
Safety Data Sheet EN

Alethia Mycoplasma Direct Control Bead

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Alethia Mycoplasma Direct Control Bead
Product Code
2855 CB

Regulatory Identifiers

CAS Number
N/A

Identified Uses

In vitro diagnostic

Manufacturers & Suppliers

Meridian Bioscience, Inc. logo

Meridian Bioscience, Inc.

manufacturer

3471 River Hills Drive, Cincinnati, Ohio 45244

(800) 343-3858

http://www.meridianbioscience.com

M

Meridian Bioscience Europe

Via del' Industria 7, 20020 Villa Cortese Milano, Italy

B

Bioline (Aust) Pty Ltd

distributor

Suite 111, National Innovation Centre Building, Australian Technology Park, Eveleigh, NSW 2015

+61 2 9209 4180

Emergency Contacts

CHEMTREC (International)

1-703-527-3887

CHEMTREC (For US)

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Albumins, blood serum 9048-46-8 1.5% No
Sorbitol (D-glucitol) 50-70-4 0.2186% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Ingestion

Clean mouth with water and drink afterwards plenty of water.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

No information available.

Specific hazards

None.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

See Section 12 for additional Ecological Information.

Cleanup methods

Soak up with inert absorbent material

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure adequate ventilation.

Storage

Keep container tightly closed in a dry and well-ventilated place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas.

Hands

Protective gloves.

Eyes

Tightly fitting safety goggles.

Respiratory

No special protective equipment required.

Skin/Body

Long sleeved clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Solidification Point
---
Metal Corrosion
---
Solubility In Fat
---
Boiling Point
No information available
Vapor Pressure
No information available
Odor Threshold
No information available
Softening Point
No information available
Bulk Density
No information available
Decomposition Temperature
No information available
Form
pellet
Ph
No information available
Crystallisation Point
---
Upper Explosive Limit
No information available
Molecular Weight
No information available
Freezing Point
---
Flash Point
No information available
Voc Content
No information available
Colour
light yellow
Relative Density
No information available
State Under Standard Conditions
---
Dynamic Viscosity
No information available
Cloud Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available
Partition Coefficient
No information available
Odor
---
Solubility In Water
Soluble in water
Physical State
Bead
Solubility
---
Density
---
Lower Explosive Limit
No information available
Auto Ignition Temperature
No information available
Physical State Data
solid
Properties Status
---
Kinematic Viscosity
No information available
Melting Point
No information available
Appearance
pellet
Vapor Density
No information available
Flammability
No information available
Explosive Limits
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Avoid

Heat, flames and sparks.

Incompatible

No materials to be especially mentioned.

Decomposition

None under normal use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Alethia Mycoplasma Direct Control Bead?

The signal word is no signal word.

What is the physical form of Alethia Mycoplasma Direct Control Bead?

Alethia Mycoplasma Direct Control Bead is a bead appearing as pellet with light yellow color.

What is Alethia Mycoplasma Direct Control Bead used for?

In vitro diagnostic

What is the melting point of Alethia Mycoplasma Direct Control Bead?

The melting point is No information available and the boiling point is No information available.