Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Iron(III) nitrate nonahydrate for analysis EMSURE® ACS,Reag. Ph Eur
- Product Code
- 1.03883
- Chemical Name
- Iron(III) nitrate nonahydrate
Regulatory Identifiers
- CAS Number
- 7782-61-8 Check regulations →
- REACH No.
- 01-2119978293-27-XXXX
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Millipore
manufacturer
Sigma-Aldrich Chemie GmbH
manufacturer
Eschenstrasse 5, D-82024 TAUFKIRCHEN
+49 (0)89 6513-1130
Emergency Contacts
CHEMTREC Deutschland
0800 181 7059
CHEMTREC weltweit
+49 (0)696 43508409
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ferric nitrate nonahydrate EC: 233-899-5 | 7782-61-8 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.
Immediate Medical Attention
Call in physician immediately for inhalation, skin contact, ingestion, and eye contact (ophthalmologist).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Nitrogen oxides (NOx), Iron oxides. Not combustible. Fire may cause evolution of: nitrous gases, nitrogen oxides. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Iron(III) nitrate nonahydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 7782-61-8
Iron(III) chloride hexahydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10025-77-1
Iron(III) chloride hexahydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10025-77-1
Sodium nitrate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7631-99-4
AMMONIUM IRON(III) SULFATE DODECAHYDRATE FOR ANALYSIS EMSURE® ACS,ISO,REAG. PH EUR
CAS: 7783-83-7
Sodium nitrite for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 7632-00-0
Nickel(II) nitrate hexahydrate for analysis EMSURE® ACS
CAS: 13478-00-7
Nitric acid 69% for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 7697-37-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Protected from light. Tightly closed. Dry. Recommended storage temperature see product label.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Acid-resistant protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
Risk of explosion with: dimethyl sulfoxide, Reducing agents
no information available
Strong oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3260
- Shipping Name
- CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Ferric nitrate nonahydrate)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Iron(III) nitrate nonahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
The signal word is danger.
What is the physical form of Iron(III) nitrate nonahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
Iron(III) nitrate nonahydrate for analysis EMSURE® ACS,Reag. Ph Eur is a solid with violet color. It has of nitric acid odor.
What is Iron(III) nitrate nonahydrate for analysis EMSURE® ACS,Reag. Ph Eur used for?
Reagent for analysis
What are the hazard statements for Iron(III) nitrate nonahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of Iron(III) nitrate nonahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
The melting point is Melting point: 47,2 °C and the boiling point is Not applicable.