Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium alginate
- Product Code
- SLS4255, SLS2038
- Chemical Name
- Sodium Alginate
- Synonyms
- Algin; Alginic Acid, Sodium Salt
Regulatory Identifiers
- CAS Number
- 9005-38-3 Check regulations →
Manufacturers & Suppliers
Sciencelab.com, Inc.
distributor
14025 Smith Rd., Houston, Texas 77396
1-800-901-7247
http://ScienceLab.com
Emergency Contacts
CHEMTREC
1-800-424-9300
International CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium alginate | 9005-38-3 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Wash with soap and water. Cover the irritated skin with an emollient. Cold water may be used.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband.
Immediate Medical Attention
Get medical attention if irritation occurs (eyes). Get medical attention if irritation develops (skin). Get medical attention (inhalation). Get medical attention if symptoms appear (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam.
Do not use water jet.
May be combustible at high temperature. Slightly flammable to flammable in presence of open flames and sparks, of heat.
SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Finish cleaning by spreading water on the contaminated surface.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. If ingested, seek medical advice immediately and show the container or the label. Keep away from incompatibles such as oxidizing agents, acids, alkalis.
Keep container tightly closed. Keep container in a cool, well-ventilated area.
Do not ingest.
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Gloves.
Safety glasses. Splash goggles.
Dust respirator. Be sure to use an approved/certified respirator or equivalent. A self contained breathing apparatus should be used to avoid inhalation of the product.
Lab coat. Full suit. Boots.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
Not available
Will not occur
Excess heat, ignition sources, dust generation, incompatible materials
oxidizing agents, acids, alkalis.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Sodium alginate known by?
Sodium alginate is also known as: Algin; Alginic Acid, Sodium Salt
What is the hazard signal word for Sodium alginate?
The signal word is warning.
What is the physical form of Sodium alginate?
Sodium alginate is a solid. (powdered solid.) appearing as solid. (powdered solid.) with white to off-white (cream) color. It has odorless. odor.
What is the solubility of Sodium alginate?
Soluble in cold water, hot water. Insoluble in diethyl ether.
What are the hazard statements for Sodium alginate?
This substance has 2 hazard statements:
- H315: Potential Acute Health Effects: Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
- Potential Chronic Health Effects: CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition.
What is the melting point of Sodium alginate?
The melting point is >300°C (572°F) and the boiling point is Not available..