Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAFETY CLEAN FS
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Detergent according to Regulation (EC) No 648/2004, Degreasing agent
Uses advised against
No uses advised against known
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, < 2% aromacs EC: 927-241-2 | --- | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove vicm into fresh air. In case of respiratory problems, consult a doctor/medical service.
Symptoms: Headache. Dizziness. Drowsiness. EXPOSURE TO HIGH CONCENTRATIONS: Disturbances of consciousness.
If possible, wipe up/dry remove chemical. Then rinse/shower immediately with (lukewarm) water. If irritaon persists, consult a doctor/medical service.
Symptoms: ON CONTINUOUS EXPOSURE/CONTACT: Dry skin. Cracking of the skin.
Rinse immediately with (lukewarm) water. Remove contact lenses, if present and easy to do. Connue rinsing. If irritaon persists, consult a doctor/medical service.
Symptoms: Redness of the eye ssue.
Rinse mouth with water. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.
Symptoms: Risk of aspiraon pneumonia.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Small fire: Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting class B foam extinguisher, Quick-acting CO2 extinguisher. Major fire: Class B foam (not alcohol-resistant).
Small fire: Water (quick-acting extinguisher, reel); risk of puddle expansion. Major fire: Water; risk of puddle expansion.
Upon combuson: CO and CO2 are formed.
Cool tanks/drums with water spray/remove them into safety.
Firefighter Protection
Gloves (EN 374). Face shield (EN 166). Protecve clothing (EN 14605 or EN 13034). Large spills/in enclosed spaces: self-contained breathing apparatus (EN 136 + EN 137). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop engines and no smoking. No naked flames or sparks. Spark- and explosionproof appliances and lighng equipment.
Contain released product, collect/pump into suitable containers. Plug the leak, cut off the supply. Dam up the liquid spill. Prevent soil and water polluon. Prevent spreading in sewers.
Take up liquid spill into inert absorbent material. Scoop absorbed substance into closing containers. Carefully collect the spill/leovers. Damaged/cooled tanks must be emped. Do not use compressed air for pumping over spills. Clean contaminated surfaces with an excess of water.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use spark-/explosionproof appliances and lighng system. Keep away from naked flames/heat. Keep away from ignion sources/sparks. Take precauons against electrostac charges. Gas/vapour heavier than air at 20°C. Observe normal hygiene standards. Remove contaminated clothing immediately. Keep container ghtly closed. Do not discharge the waste into the drain.
Storage temperature: < 50 °C. Meet the legal requirements. Store in a cool area. Keep container in a well-venlated place. Protect against frost. Keep out of direct sunlight. Provide for a tub to collect spills.
Observe normal hygiene standards. Remove contaminated clothing immediately.
Keep away from naked flames/heat. Keep away from ignion sources/sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use spark-/explosionproof appliances and lighng system. Keep away from naked flames/heat. Keep away from ignion sources/sparks. Take precauons against electrostac charges. Measure the concentraon in the air regularly. Carry operaons in the open/under local exhaust/venlaon or with respiratory protecon.
Protecve gloves against chemicals (EN 374). Materials: nitrile rubber, breakthrough time: > 480 minutes, Thickness: 0.35 mm, Protection index: Class 6
Face shield (EN 166).
Protecve clothing (EN 14605 or EN 13034).
See secons 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal condions.
No data available.
Use spark-/explosionproof appliances and lighng system. Keep away from naked flames/heat. Keep away from ignion sources/sparks. Take precauons against electrostac charges.
Oxidizing agents, reducing agents, (strong) acids, (strong) bases.
Upon combuson: CO and CO2 are formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3295
- Shipping Name
- hydrocarbons, liquid, n.o.s.
- Transport Class
- 3
- Packing Group
- III
223
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SAFETY CLEAN FS?
The signal word is danger.
What is the physical form of SAFETY CLEAN FS?
SAFETY CLEAN FS is a liquid with no data available on colour color. It has characterisc odour odor.
What is SAFETY CLEAN FS used for?
Detergent according to Regulation (EC) No 648/2004, Degreasing agent
What are the hazard statements for SAFETY CLEAN FS?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of SAFETY CLEAN FS?
The melting point is No data available in the literature and the boiling point is 130 °C - 166 °C.