NextSDS Logo
Safety Data Sheet EN

MRS broth (DE MAN, ROGOSA and SHARPE) GranuCult®

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MRS broth (DE MAN, ROGOSA and SHARPE) GranuCult®
Product Code
1.10661

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Reagent for analysis

Manufacturers & Suppliers

M

Merck KGaA

manufacturer

Frankfurter Str. 250, D-64271 DARMSTADT

+49 (0)6151 72-0

Emergency Contacts

CHEMTREC (GB)

+(44)-870-8200418

CHEMTREC Ireland

+(353)-19014670

CHEMTREC India

001-803-017-9114

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Diammonium hydrogen citrate EC: 221-146-3 3012-65-5 1 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation: fresh air.

Skin contact

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.

Eye contact

After eye contact: rinse out with plenty of water. Remove contact lenses.

Ingestion

After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water Foam Carbon dioxide (CO2) Dry powder

Unsuitable media

For this substance/mixture no limitations of extinguishing agents are given.

Specific hazards

Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.

Instructions

Suppress (knock down) gases/vapors/mists with a water spray jet.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Environmental

Do not let product enter drains.

Cleanup methods

Take up dry. Clean up affected area.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

For precautions see section 2.2.

Storage

Protected from light. Tightly closed. Dry.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L

Eyes

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses

Respiratory

required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Metal Corrosion
---
Properties Status
---
Cloud Point
---
Partition Coefficient
No data available
Upper Explosive Limit
No data available
Physical State
solid
Bulk Density
ca.620 kg/m³
Freezing Point
---
Ph
5,5 - 5,9 at 50 g/l at 30 °C (after autoclaving)
Solidification Point
---
Colour
beige
Vapor Density
---
Dynamic Viscosity
No data available
Vapor Pressure
No data available
Relative Evaporation Rate
---
Explosive Limits
---
Voc Content
---
Melting Point
No data available
Softening Point
---
Decomposition Temperature
No data available
Auto Ignition Temperature
No data available
Lower Explosive Limit
No data available
Kinematic Viscosity
No data available
Molecular Weight
---
Relative Density
No data available
Physical State Data
solid
Flash Point
No data available
Boiling Point
No data available
Form
---
Solubility
---
Density
No data available
Solubility In Fat
---
Solubility In Water
50 g/l at 100 °C
Evaporation Rate
---
Odor
peptone-like
State Under Standard Conditions
---
Odor Threshold
---
Appearance
---
Flammability
No data available
Crystallisation Point
---
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Hazardous reactions

Violent reactions possible with: strong oxidising agents

Avoid

Exposure to light.

Incompatible

No data available

Decomposition

In the event of fire: see section 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MRS broth (DE MAN, ROGOSA and SHARPE) GranuCult®?

The signal word is no signal word.

What is the physical form of MRS broth (DE MAN, ROGOSA and SHARPE) GranuCult®?

MRS broth (DE MAN, ROGOSA and SHARPE) GranuCult® is a solid with beige color. It has peptone-like odor.

What is MRS broth (DE MAN, ROGOSA and SHARPE) GranuCult® used for?

Reagent for analysis

What is the melting point of MRS broth (DE MAN, ROGOSA and SHARPE) GranuCult®?

The melting point is No data available and the boiling point is No data available.