NextSDS Logo
Safety Data Sheet EN

Tryptic Soy Broth Casein-peptone soymeal-peptone broth for microbiology (According harm. EP/USP/JP and ISO)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Tryptic Soy Broth Casein-peptone soymeal-peptone broth for microbiology (According harm. EP/USP/JP and ISO)
Product Code
1.05459

Regulatory Identifiers

CAS Number
N/A
REACH No.
This product is a mixture. REACH Registration Number see section 3.

Identified Uses

Biochemical research/analysis, Chemical production

Manufacturers & Suppliers

M

Merck KGaA

Frankfurter Str. 250, D-64271 DARMSTADT

+49 (0)6151 72-0

Emergency Contacts

CHEMTREC (GB)

+(44)-870-8200418

CHEMTREC Ireland

+(353)-19014670

CHEMTREC India

001-803-017-9114

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

No components need to be disclosed according to the applicable regulations.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation: fresh air.

Skin contact

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.

Eye contact

After eye contact: rinse out with plenty of water. Remove contact lenses.

Ingestion

After swallowing: make victim drink water (two glasses at most).

Immediate Medical Attention

Consult doctor if feeling unwell.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water Foam Carbon dioxide (CO2) Dry powder

Unsuitable media

For this substance/mixture no limitations of extinguishing agents are given.

Specific hazards

Carbon oxides, Hydrogen chloride gas, Sodium oxides, Mixture with combustible ingredients. Fire may cause evolution of: Hydrogen chloride gas, Oxides of phosphorus. Development of hazardous combustion gases or vapours possible in the event of fire.

Instructions

Suppress (knock down) gases/vapors/mists with a water spray jet.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.

Environmental

Do not let product enter drains.

Cleanup methods

Take up dry. Clean up affected area.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

For precautions see section 2.2.

Storage

Protected from light. Tightly closed. Dry. Recommended storage temperature see product label.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: > 480 min, Material tested: KCL 741 Dermatril® L

Eyes

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses

Respiratory

required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Evaporation Rate
---
Upper Explosive Limit
No data available
Odor Threshold
---
Freezing Point
---
Bulk Density
ca.570 kg/m3
Properties Status
---
State Under Standard Conditions
---
Cloud Point
---
Ph
No data available
Solubility In Fat
---
Odor
peptone-like
Solubility
---
Melting Point
No data available
Boiling Point
No data available
Flammability
No data available
Softening Point
---
Physical State Data
solid
Solidification Point
---
Decomposition Temperature
No data available
Metal Corrosion
---
Molecular Weight
---
Relative Density
No data available
Vapor Pressure
No data available
Vapor Density
---
Lower Explosive Limit
No data available
Partition Coefficient
No data available
Colour Intensity
---
Kinematic Viscosity
No data available
Solubility In Water
30 g/l at 20 °C
Appearance
---
Physical State
solid
Explosive Limits
---
Voc Content
---
Colour
beige
Dynamic Viscosity
No data available
Crystallisation Point
---
Flash Point
No data available
Auto Ignition Temperature
No data available
Density
No data available
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Hazardous reactions

Violent reactions possible with: strong oxidising agents

Avoid

Sensitivity to light

Incompatible

No data available

Decomposition

In the event of fire: see section 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Tryptic Soy Broth Casein-peptone soymeal-peptone broth for microbiology (According harm. EP/USP/JP and ISO)?

The signal word is no signal word.

What is the physical form of Tryptic Soy Broth Casein-peptone soymeal-peptone broth for microbiology (According harm. EP/USP/JP and ISO)?

Tryptic Soy Broth Casein-peptone soymeal-peptone broth for microbiology (According harm. EP/USP/JP and ISO) is a solid with beige color. It has peptone-like odor.

What is Tryptic Soy Broth Casein-peptone soymeal-peptone broth for microbiology (According harm. EP/USP/JP and ISO) used for?

Biochemical research/analysis, Chemical production

What is the melting point of Tryptic Soy Broth Casein-peptone soymeal-peptone broth for microbiology (According harm. EP/USP/JP and ISO)?

The melting point is No data available and the boiling point is No data available.