Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ACTICIDE TC 10
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Biocidal product for industrial use.
Manufacturers & Suppliers
Thor Specialities (UK) LTD.
manufacturer
Wincham Avenue, Wincham Northwich, Cheshire CW9 6GB, United Kingdom
+44 (0) 1606 818800
Emergency Contacts
National Poisons Information Service
0844-892-0111
24 h service
Transport Emergency phone number
+49 621 60-43333
24 h service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Octyl-2H-isothiazol-3-one EC: 247-761-7 | 26530-20-1 | 0.93% | Yes |
The total content and the content of free 2-Octyl-2H-isothiazol-3-one [C oit total (C oit free)] are indicated. Only the content of free OIT is toxicological relevant and is subject to the classification of this mixture regarding the following properties: environmental hazardous properties, skin and eye irritation, sensitisation.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: skin irritation or rash
Rinse eyes thoroughly with plenty of water for at least 10 minutes while holding eyelids open. If symptoms persist, consult a physician.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Instantly call for doctor.
Immediate Medical Attention
Instantly call for doctor (if swallowed), consult doctor in case of symptoms (inhalation), consult a physician (eye contact), get medical advice/attention (skin contact).
Medical Treatment
Treat skin and mucous membrane with antihistamine and corticoid preparations.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, extinguishing powder, $\mathrm{CO}_{2}$, foam.
Water with a full water jet.
In case of fire, toxic incineration products may be released such as: Nitrogen oxides (NOx), Sulphur dioxide (SO2), Carbon monoxide (CO)
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Cover the rest with absorbent, mix intensively and collect mechanically.
Collect large amounts in suitable container.
As the product is hazardous for the aquatic environment, it must be prevented from reaching surface water.
Collect large amounts in suitable container. Cover the rest with absorbent, mix intensively and collect mechanically.
Materials: multi-purpose absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Clean contaminated work equipment immediately to avoid skin corrosion/-irritation and/or allergic skin reactions in case of unconscious skin contact. Homogenize prior to use.
Protect from frost.
Clean contaminated work equipment immediately to avoid skin corrosion/-irritation and/or allergic skin reactions in case of unconscious skin contact.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of contamination devices to rinse eyes or skin immediately under running water must be available.
Chemical protective gloves (EN ISO 374-1:2016). Check the condition of protective gloves after each use for any damages like holes, cuts or tears. Do not wear protective gloves longer than necessary. After use of gloves apply skin-cleaning agents and skin cosmetics. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material: Thickness: 0.4 mm; break-through time: 480 min; material: Nitrile; permeation: level 6. Gloves made of the following materials are not suitable: Gloves for mechanical protection do not provide protection against chemicals.
Safety goggles (EN 166:2001)
Not required
Protective clothing (EN ISO 13688:2013)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Hazards associated with the product's reactivity have not been identified.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
None, if storage and handling is done according to specification.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ACTICIDE TC 10?
The signal word is warning.
What is the physical form of ACTICIDE TC 10?
ACTICIDE TC 10 is a dispersion with white color. It has type specific odor.
What is ACTICIDE TC 10 used for?
Biocidal product for industrial use.
What are the hazard statements for ACTICIDE TC 10?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of ACTICIDE TC 10?
The melting point is not determined and the boiling point is ca. 100 °C (H₂O).