Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AQUACER 2700
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Wax Additive
Manufacturers & Suppliers
BYK-Cera bv
manufacturer
Danzigweg 23, 7418 EN Deventer
+31 881 220 300
BYK-Cera bv (Regulatory Affairs)
manufacturer
+49 281 670-23532
Emergency Contacts
GBK Gefahrgutbuero GmbH
+49 6132 84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Non-ionic emulsion based on a Fischer Tropsch wax
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyoxyethylene isodecyl ether | 61827-42-7 | 3 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Clean mouth with water and drink afterwards plenty of water. Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Immediate Medical Attention
Take victim immediately to hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry chemical, Foam
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. To avoid spills during handling keep bottle on a metal tray.
Keep container tightly closed in a dry and well-ventilated place. Keep away from heat.
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems.
Impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
No data available
Not applicable
Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AQUACER 2700?
The signal word is danger.
What is the physical form of AQUACER 2700?
AQUACER 2700 is a liquid appearing as emulsion with white - off-white color.
What is AQUACER 2700 used for?
Wax Additive
What are the hazard statements for AQUACER 2700?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.
What is the melting point of AQUACER 2700?
The melting point is 2 °C and the boiling point is 100 °C (1.013 hPa).