Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BYK-LP X 20878
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive for absorption of UV light
Manufacturers & Suppliers
BYK-Chemie GmbH
manufacturer
Abelstrasse 45, 46483 Wesel
+49 281 670-0
Emergency Contacts
GBK Gefahrgut Buero GmbH
+49 6132 84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tripropylenglycoldiacrylate EC: 256-032-2 | 42978-66-5 | 50 - 100% | Yes |
| zinc oxide EC: 215-222-5 | 1314-13-2 | 30 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.
If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Smoking, eating and drinking should be prohibited in the application area.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
PVC disposable gloves Break through time: 120 min. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems.
In the case of vapour formation use a respirator with an approved filter.
impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
no data available
Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Zinc oxide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BYK-LP X 20878?
The signal word is warning.
What is the physical form of BYK-LP X 20878?
BYK-LP X 20878 is a liquid appearing as dispersion with white color. It has slight odor.
What is BYK-LP X 20878 used for?
Additive for absorption of UV light
What are the hazard statements for BYK-LP X 20878?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H410: Very toxic to aquatic life with long lasting effects.