NextSDS Logo
Safety Data Sheet EN

Cellulose, microcrystalline

CAS 9004-34-6
EC 232-674-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Cellulose, microcrystalline
Product Code
A17730

Regulatory Identifiers

CAS Number
9004-34-6 Check regulations →
EC Number
232-674-9 Check regulations →

Identified Uses

Laboratory chemicals.

Uses advised against

No Information available

Manufacturers & Suppliers

A

Avocado Research Chemicals Ltd. (Part of Thermo Fisher Scientific)

manufacturer

Shore Road, Heysham, Lancashire, LA3 2XY, United Kingdom

+44 (0) 1524 850506

Emergency Contacts

Information US

001-800-227-6701

Information Europe

+32 14 57 52 11

Emergency Number US

001-201-796-7100

Emergency Number Europe

+32 14 57 52 99

CHEMTREC

001-800-424-9300

CHEMTREC

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Cellulose 9004-34-6 100% No

REACH registration number - Full text of Hazard Statements: see section 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing is difficult, give oxygen. Get medical attention if symptoms occur.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes. Get medical attention if symptoms occur.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Do NOT induce vomiting. Get medical attention.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.

Unsuitable media

No information available.

Specific hazards

Fine dust dispersed in air may ignite. Thermal decomposition can lead to release of irritating gases and vapors. Keep product and empty container away from heat and sources of ignition.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment as required. Avoid dust formation. Ensure adequate ventilation. Avoid contact with skin, eyes or clothing.

Environmental

Avoid release to the environment.

Cleanup methods

Sweep up and shovel into suitable containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment/face protection. Ensure adequate ventilation. Avoid dust formation. Avoid contact with skin, eyes or clothing. Avoid ingestion and inhalation.

Storage

Keep in a dry, cool and well-ventilated place. Keep container tightly closed.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

None under normal use conditions. For small scale/Laboratory use: Maintain adequate ventilation

Hands

Protective gloves. Glove materials: Nitrile rubber, Neoprene, Natural rubber, PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374 (minimum requirement).

Eyes

Wear safety glasses with side shields (or goggles) (European standard - EN 166)

Respiratory

No protective equipment is needed under normal use conditions. Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter

Skin/Body

Wear appropriate protective gloves and clothing to prevent skin exposure.

Environmental

No information available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility
---
Crystallisation Point
---
Explosive Limits
---
Properties Status
---
Evaporation Rate
Not applicable - Solid
Freezing Point
---
Softening Point
---
Vapor Density
Not applicable
Solubility In Water
Insoluble
Odor Threshold
No data available
Lower Explosive Limit
---
Colour
---
Colour Intensity
---
Flash Point
No information available (Method - No information available)
Solidification Point
---
Odor
Odorless
Ph
5-7.5 (100 g/L aq.sol)
Melting Point
No data available
Auto Ignition Temperature
500 °C / 932 °F
Physical State Data
solid
Appearance
White
Partition Coefficient
---
State Under Standard Conditions
---
Boiling Point
No information available
Voc Content
---
Decomposition Temperature
200 °C
Relative Density
---
Cloud Point
---
Dynamic Viscosity
Not applicable
Kinematic Viscosity
---
Metal Corrosion
---
Flammability
---
Solubility In Fat
---
Physical State
Powder Solid
Density
---
Vapor Pressure
---
Form
---
Upper Explosive Limit
---
Molecular Weight
---
Bulk Density
No data available
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

None known, based on information available

Hazardous reactions

Hazardous polymerization does not occur. No information available.

Avoid

Avoid dust formation. Incompatible products. Excess heat.

Incompatible

Strong oxidizing agents.

Decomposition

Carbon monoxide (CO). Carbon dioxide (CO₂).

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Cellulose, microcrystalline?

The signal word is no signal word.

What is the physical form of Cellulose, microcrystalline?

Cellulose, microcrystalline is a powder solid appearing as white . It has odorless odor.

What is Cellulose, microcrystalline used for?

Laboratory chemicals.

What is the melting point of Cellulose, microcrystalline?

The melting point is No data available and the boiling point is No information available.