NextSDS Logo
Safety Data Sheet EN

Stanley – Blue Chalk

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Stanley – Blue Chalk

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Snap line, mark

Manufacturers & Suppliers

S

Stanley Black & Decker

manufacturer

Emergency Contacts

Emergency Contact

(888) 698-2571

Emergency Contact

+1-410-329-9200

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1A H350

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H350 May cause cancer

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P280 Wear protective gloves and eye protection.
P405 Store locked up.
If exposed or concerned, get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate EC: 207-439-9 471-34-1 70 - 90% No
Sodium alumino sulphosilicate EC: 309-928-3 57455-37-5 10 - 30% No
Crystalline silica (quartz)¹ EC: 238-878-4 14808-60-7 0.1 - 1% No

Notes

¹ Calcium carbonate may contain quartz, a form of crystalline silica at levels between 0.1 and 1.0 % and varies naturally.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove from exposure and move to fresh air immediately. Encourage the patient to blow nose to ensure clear breathing passages. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Symptoms: cough

Skin contact

Wet clothing first to minimize dust generation, then; remove contaminated clothing and shoes. Launder contaminated clothing before wearing again. Wash affected area with water (and soap if available)

Symptoms: irritation

Eye contact

Do not rub eyes, rubbing may cause abrasions. Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.

Symptoms: abrasions

Ingestion

Wash mouth out with plenty of water. If the victim is conscious and alert, give 2-4 cupfuls of milk or water. Do not induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Get medical aid if cough or other symptoms appear. Get medical aid in the event of irritation. Get medical aid. Get medical aid immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Substance is noncombustible.

Specific hazards

Not considered to be a significant fire risk, however; the containers may burn, releasing carbon monoxide, and carbon dioxide.

Firefighter Protection

As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow this material to be released to the environment without proper governmental permits.

Cleanup methods

Recover the product whenever possible. Pick up and place in a suitable container for reclamation or disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid creating or breathing dust. Practice good personal hygiene, (hand washing, etc.) after using this product. Avoid contact with skin and eyes.

Storage

Store this product in a tightly closed container in a dry, well-ventilated area away from incompatible substances.

Hygiene

Practice good personal hygiene, (hand washing, etc.) after using this product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Powder
Colour
Blue
Colour Intensity
---
Form
---
Odor
Odorless.
Odor Threshold
---
Ph
---
Melting Point
Loss of sulfur above 752 °F (400°C).
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
2.68
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
<0.0002 (Trace)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal temperatures and pressures.

Hazardous reactions

Hazardous Polymerization: Does not occur.

Avoid

At temperatures above 752 °F in the presence of air, an exothermic chemical reaction can occur with the evolution of sulfur dioxide gas. Contact with acids liberates hydrogen sulfide gas

Incompatible

Acids.

Decomposition

Hydrogen sulfide gas, Sulfur dioxide, Carbon monoxide, and Carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Sodium alumino sulphosilicate-Pigments are very stable, except under acidic conditions when they will decompose to white siliceous material with the evolution of hydrogen gas. These pigments pose no threat to the environment if disposed of responsibly.

The substance is very stable, except under acidic conditions where it decomposes to white siliceous material and hydrogen gas. It is considered to pose no threat to the environment if disposed of responsibly.

12.3 Bioaccumulative potential

No information found.

No information found.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Disposal by landfill may be acceptable. Consult an expert on the disposal of recovered material for compliance with state, provincial, and/or local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Stanley – Blue Chalk?

The signal word is danger.

What is the physical form of Stanley – Blue Chalk?

Stanley – Blue Chalk is a solid appearing as powder with blue color. It has odorless. odor.

What is Stanley – Blue Chalk used for?

Snap line, mark

What are the hazard statements for Stanley – Blue Chalk?

This substance has 1 hazard statement:

  • H350: May cause cancer

What is the melting point of Stanley – Blue Chalk?

The melting point is Loss of sulfur above 752 °F (400°C). .