Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AQUAGEL
- Product Code
- 110881E
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- V91D-15PW-610D-Y9QM
Identified Uses
Lubricant
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Limited
Forest Park, Mullingar Industrial Estate, Mullingar Co. Westmeath, Ireland
+353 1 276 3500
Ecolab Ltd.
PO Box 11; Winnington Avenue, Northwich, Cheshire, United Kingdom CW8 4DX
+353 (0)1 276 3500
Emergency Contacts
The National Poisons Information Centre
01 8092166
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous ingredients
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention if symptoms occur.
Rinse with plenty of water.
Rinse with plenty of water.
Rinse mouth. Get medical attention if symptoms occur.
Medical Treatment
No specific measures identified.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Advice for non-emergency personnel : Refer to protective measures listed in sections 7 and 8. Advice for emergency responders : If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.
dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
No special environmental precautions required.
collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water.
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
AQUASONIC® 100 ULTRASOUND TRANSMISSION GEL
---
AQUASONIC® 100 ULTRASOUND TRANSMISSION GEL
---
AQUASONIC® 100 ULTRASOUND TRANSMISSION GEL
---
Alco Gel
---
AQUASONIC® 100 STERILE ULTRASOUND TRANSMISSION GEL
---
AQUASONIC® 100 STERILE ULTRASOUND TRANSMISSION GEL
---
AQUASONIC® 100 STERILE ULTRASOUND TRANSMISSION GEL
---
GEL PREVENT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands after handling. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE). For personal protection see section 8.
Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.
Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
No special protective equipment required.
No special protective equipment required.
None required if airborne concentrations are maintained below the exposure limit listed in Exposure Limit Information. Use certified respiratory protection equipment meeting EU requirements(89/656/EEC, (EU) 2016/425), or equivalent, when respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization.
No special protective equipment required.
Consider the provision of containment around storage vessels.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
None known.
Depending on combustion properties, decomposition products may include following materials: Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
This product has no known ecotoxicological effects.
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Diluted product can be flushed to sanitary sewer if regulations permit.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AQUAGEL?
The signal word is no signal word.
What is the physical form of AQUAGEL?
AQUAGEL is a liquid with colourless color. It has odourless odor.
What is the solubility of AQUAGEL?
Not applicable and/or not determined for the mixture
What is AQUAGEL used for?
Lubricant
What is the melting point of AQUAGEL?
The melting point is Not applicable and/or not determined for the mixture and the boiling point is Not applicable and/or not determined for the mixture.