CAMPYLOBACTER Selective Supplement Butzler

Move to fresh air. Oxygen or artificial respiration if needed. Obtain medical attention.

Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled. Symptoms of allergic reaction may include trouble breathing, dizziness, lightheadedness, chest pain.

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get medical attention if symptoms occur.

Symptoms: May cause allergic skin reaction. Symptoms of allergic reaction may include rash, itching, swelling, tingling of the hands and feet, muscle pain or flushing.

Rinse thoroughly with plenty of water, also under the eyelids. Obtain medical attention.

Clean mouth with water and drink afterwards plenty of water. Immediate medical attention is required.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

No information available.

Thermal decomposition can lead to release of irritating gases and vapors.

Do not get in eyes, on skin, or on clothing.

Do not flush into surface water or sanitary sewer system.

Clean contaminated surface thoroughly.

Use only under a chemical fume hood. Do not get in eyes, on skin, or on clothing. Wear personal protective equipment. Avoid dust formation.

Keep at temperatures between 2° and 8 °C.

Handle only in a place equipped with local exhaust (or other appropriate exhaust). Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source

Protective gloves. Glove material: Disposable gloves, Breakthrough time: See manufacturers recommendations, Glove thickness: -, EU standard: EN 374, Glove comments: (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatibility, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.

Safety glasses with side-shields (European standard - EN 166)

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: In case of insufficient ventilation wear suitable respiratory equipment. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. When RPE is used a face piece Fit Test should be conducted

Long sleeved clothing

Prevent product from entering drains. Do not allow material to contaminate ground water system.

Stable under recommended storage conditions

None known, based on information available

None under normal processing. Hazardous polymerization does not occur.

Avoid dust formation.

Strong oxidizing agents. Bases.

May emit toxic fumes under fire conditions - carbon monoxide, carbon dioxide, nitrogen oxides, and hydrogen chloride.

Dispose of as hazardous waste in compliance with local and national regulations.

Dispose of in accordance with the European Directives on waste and hazardous waste. Dispose of in accordance with local regulations.