Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Brilliance Candida Agar Base
- Product Code
- CM1002
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Oxoid Ltd
manufacturer
Wade Road, Basingstoke, Hants, UK, RG24 8PW
+44 (0) 1256 841144
Emergency Contacts
Carechem 24
+44 (0) 1865 407333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 24.3% | No |
| Barley, malt EC: 232-310-9 | 8002-48-0 | 8% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Oxygen or artificial respiration if needed.
Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Wash off with warm water and soap.
Rinse immediately with plenty of water.
Do not induce vomiting. Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Seek medical advice (eye contact). Get medical attention if irritation develops and persists (skin contact). Obtain medical attention (ingestion/inhalation).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid dust formation. Ensure adequate ventilation. Use personal protective equipment.
Do not flush into surface water or sanitary sewer system.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
BILE AESCULIN AGAR
---
mCCD (Modified charcoal cefoperazone deoxycholate) agar (base) acc. ISO 10272
---
Yeast Extract Dextrose Chloramphenicol Agar
---
DICHLORAN-GLYCEROL DG18 AGAR BASE
---
Violet Red Bile Glucose Agar
---
BRILA (Brilliant-green bile Lactose) broth acc. ISO 4831, ISO 4832 and FDA-BAM
---
KANAMYCIN AESCULIN AZIDE AGAR BASE
---
MacCONKEY AGAR No3
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Do not breathe dust. Avoid contact with skin, eyes and clothing.
Keep container tightly closed in a dry and well-ventilated place. Protect from sunlight.
Avoid contact with skin, eyes and clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
Protective gloves. Disposable gloves. See manufacturers recommendations. EN 374. (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
Safety glasses with side-shields (European standard - EN 166)
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. In case of insufficient ventilation wear suitable respiratory equipment. Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. When RPE is used a face piece Fit Test should be conducted
Long sleeved clothing
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions: Hygroscopic
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Keep away from direct sunlight. Protect from moisture.
None known.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Brilliance Candida Agar Base?
The signal word is danger.
What is the physical form of Brilliance Candida Agar Base?
Brilliance Candida Agar Base is a powder solid appearing as light brown . It has no information available odor.
What is Brilliance Candida Agar Base used for?
Laboratory chemicals.
What are the hazard statements for Brilliance Candida Agar Base?
This substance has 1 hazard statement:
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled
What is the melting point of Brilliance Candida Agar Base?
The melting point is No data available and the boiling point is Not applicable.