Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ISE Cleaning Solution / Elecsys SysClean
- Product Code
- 11298500160
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Roche Diagnostics
manufacturer
9115 Hague Road, 46250 Indianapolis IN
1-800-428-5074
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.
Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: untreated wounds from corrosion of the skin
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital. Rinse mouth with water.
Immediate Medical Attention
Consult a physician. Take victim immediately to hospital.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
ISE cleaning solution Sys Clean
---
Electronic Cleaning Solvent
---
Electronic Cleaning Solvent Plus
---
ISH Cleaning Solution (Dako Omnis)
---
Clear-It Cleaning Solution
---
Cleaning Solution D
---
RS Pro Ultrasonic Cleaning Liquid
UFI: 44R7-J06P-U004-KM5N
CLEANING LIQUID, (ESL5) 100ML, CLEANING LIQUID, (ESL5) 500ML, ECO-UV, ESL5P-CL
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Smoking, eating and drinking should be prohibited in the application area.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No decomposition if stored and applied as directed.
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1824
- Shipping Name
- Sodium hydroxide solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ISE Cleaning Solution / Elecsys SysClean?
The signal word is warning.
What is the physical form of ISE Cleaning Solution / Elecsys SysClean?
ISE Cleaning Solution / Elecsys SysClean is a liquid appearing as liquid with colourless color. It has slight chlorine odor.
What are the hazard statements for ISE Cleaning Solution / Elecsys SysClean?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of ISE Cleaning Solution / Elecsys SysClean?
The melting point is No data available and the boiling point is No data available.